Dock Street Brokers : Serving Northwest Fishermen Since 1976
info@dockstreetbrokers.com 206.789.5101 or toll free 1.800.683.0297
help
$185,000
SP18-006 Sternpickers
Year: 1982 Length: 32 Hull: Fiberglass Builder: Wegley Location: Alaska
32'x13'x3' fiberglass, flush deck, sternpicker, built by Wegley in 1982. Volvo TAMD 71B main, rated at 380 hp. Twin Disc 509 gear. Fuel capacity of 300 gallons in fiberglass tank. Flush decked in 2011, w/ aluminum hatch covers and combings. Packs 18k lbs in (7) insulated holds. Includes uninstalled 7.5 ton PacWest RSW system. Maritime Fab power roller, slider, White hydraulic drum drive, and manual levelwind. Electronics include Garmin GPS, plotter, sounder, Furuno radar, (2) VHF, and uninstalled Sitex autopilot. Call for list of recent upgrades. Asking $185,000.
$185,000
BB18-007 Bristol Bay
Year: 1982 Length: 32 Hull: Fiberglass Builder: Wegley Location: Alaska
32'x13'x3' fiberglass, flush deck, sternpicker, built by Wegley in 1982. Volvo TAMD 71B main, rated at 380 hp. Twin Disc 509 gear. Fuel capacity of 300 gallons in fiberglass tank. Flush decked in 2011, w/ aluminum hatch covers and combings. Packs 18k lbs in (7) insulated holds. Includes uninstalled 7.5 ton PacWest RSW system. Maritime Fab power roller, slider, White hydraulic drum drive, and manual levelwind. Electronics include Garmin GPS, plotter, sounder, Furuno radar, (2) VHF, and uninstalled Sitex autopilot. Call for list of recent upgrades. Asking $185,000.
$1,250,000
LL16-016 Longliner
Year: 1980 Length: 58 Hull: Fiberglass Builder: Skandia Boat Location: Washington
58'x18.5' fiberglass combination seine/crab/longliner built by Skandia in 1980. Efficient Isuzu main at 505 hp uses 7 gph. Twin Disc triple pump PTO and MG 514 gear. Isuzu 40 kw and John Deere 30 kw aux. Keypower 14" bow thruster. Chills 120k lbs salmon and 65 tons squid w/ twin 18 ton IMS chillers. Fish holds reconstructed at Delta Shipyard with 1" resin infused panels and additional deck reinforcement. Marco power block, Pilkington deck winch, crab davit, block, bait chopper, and complete longline deck set up. Tufflex watertight deck coating. Redundant state of the art electronics and spacious galley with washer/dryer. Call for a survey and complete list of deck gear. Asking $1,250,000.
$1,250,000
CO16-023 Combination
Year: 1980 Length: 58 Hull: Fiberglass Builder: Skandia Boat Location: Washington
58'x18.5' fiberglass combination seine/crab/longliner built by Skandia in 1980. Efficient Isuzu main at 505 hp uses 7 gph. Twin Disc triple pump PTO and MG 514 gear. Isuzu 40 kw and John Deere 30 kw aux. Keypower 14" bow thruster. Chills 120k lbs salmon and 65 tons squid w/ twin 18 ton IMS chillers. Fish holds reconstructed at Delta Shipyard with 1" resin infused panels and additional deck reinforcement. Marco power block, Pilkington deck winch, crab davit, block, bait chopper, and complete longline deck set up. Tufflex watertight deck coating. Redundant state of the art electronics and spacious galley with washer/dryer. Call for a survey and complete list of deck gear. Asking $1,250,000.
$1,250,000
CR16-024 Crabbers
Year: 1980 Length: 58 Hull: Fiberglass Builder: Skandia Boat Location: Washington
58'x18.5' fiberglass combination seine/crab/longliner built by Skandia in 1980. Efficient Isuzu main at 505 hp uses 7 gph. Twin Disc triple pump PTO and MG 514 gear. Isuzu 40 kw and John Deere 30 kw aux. Keypower 14" bow thruster. Chills 120k lbs salmon and 65 tons squid w/ twin 18 ton IMS chillers. Fish holds reconstructed at Delta Shipyard with 1" resin infused panels and additional deck reinforcement. Marco power block, Pilkington deck winch, crab davit, block, bait chopper, and complete longline deck set up. Tufflex watertight deck coating. Redundant state of the art electronics and spacious galley with washer/dryer. Call for a survey and complete list of deck gear. Asking $1,250,000.
$1,250,000
SE16-014 Seiners
Year: 1980 Length: 58 Hull: Fiberglass Builder: Skandia Boat Location: Washington
58'x18.5' fiberglass combination seine/crab/longliner built by Skandia in 1980. Efficient Isuzu main at 505 hp uses 7 gph. Twin Disc triple pump PTO and MG 514 gear. Isuzu 40 kw and John Deere 30 kw aux. Keypower 14" bow thruster. Chills 120k lbs salmon and 65 tons squid w/ twin 18 ton IMS chillers. Fish holds reconstructed at Delta Shipyard with 1" resin infused panels and additional deck reinforcement. Marco power block, Pilkington deck winch, crab davit, block, bait chopper, and complete longline deck set up. Tufflex watertight deck coating. Redundant state of the art electronics and spacious galley with washer/dryer. Call for a survey and complete list of deck gear. Asking $1,250,000.
$180,000
BB18-053 Bristol Bay
Year: 1983 Length: 32 Hull: Fiberglass Builder: Modutech Location: Alaska
32'x14'x28" fiberglass Bristol Bay gillnetter built by Modutech in 1983. Twin Volvo TAMD60S w/ 520 hp combined. Twin Disc 506 gears. New steel skags and V-braces. Packs 12k lbs in (10) new slush bags. Slider reel w/ levelwind and power roller. Electronics include Garmin GPS, radar, sounder, VHF, 2M and autopilot. Diesel stove, head, shower, focsle heater, new fridge, and (4) berths. Package includes 40' container, (9) nets, Chevy van and chest freezer. Asking $180,000 for everything.
$40,000
BB18-052 Bristol Bay
Year: 1982 Length: 32 Hull: Aluminum Builder: Shore Location: Alaska
32'x11.5'x2.5' aluminum Bristol Bay gillnetter built by Shore in 1982. New Chrysler 440 rated at 330 hp, installed in 2017 w/ less than 500 hours. Rebuilt transmission installed in 2018. Aluminum fish holds pack 12k lbs. Most hydraulic lines replaced over past two seasons. Drum modified to fit 200 fathoms of gear. Kinematics power roller and levelwind. New shaft, cutlass bearings, and prop installed 2018. Electronics include (3) Garmin GPS w/ sounder, Bluetooth stereo, LED Light bar on bridge and LED deck lights. Includes (6) 50 ftm rehung shackles gear. New Survival Suits. New brailers in 2017. Great opportunity to get started in the Bay. Asking $40,000.
$30,000
PK18-024 Boat/Permit Pkgs
Year: 1939 Length: 42 Hull: Wood Builder: Tacoma Boat Location: Oregon
42'x11.4'x5.8' wood troller built by Tacoma Boat in 1939. Detroit 671 main rated at 185 hp, w/ Twin Disc reduction gear. Fuel capacity of 400 gallons in (2) steel tanks. Insulated fish hold. Equipped with trolling poles, stabilizers, 3-spool hydraulic gurdies, and tuna puller. Electronics include GPS, VHF, 2-meter, radar, color sounder, Furuno plotter, ComNav 1001 autopilot, and Cobra inverter. Includes unlimited OR salmon troll permit and gear. Call for survey. Asking $30,000.
$30,000
TR18-051 Trollers
Year: 1939 Length: 42 Hull: Wood Builder: Tacoma Boat Location: Oregon
42'x11.4'x5.8' wood troller built by Tacoma Boat in 1939. Detroit 671 main rated at 185 hp, w/ Twin Disc reduction gear. Fuel capacity of 400 gallons in (2) steel tanks. Insulated fish hold. Equipped with trolling poles, stabilizers, 3-spool hydraulic gurdies, and tuna puller. Electronics include GPS, VHF, 2-meter, radar, color sounder, Furuno plotter, ComNav 1001 autopilot, and Cobra inverter. Includes unlimited OR salmon troll permit and gear. Call for survey. Asking $30,000.
$400,000
TN18-021 Tuna
Year: 1980 Length: 47 Hull: Fiberglass Builder: Frosad Location: BC
47'x15'x8' fiberglass freezer troller built by Frostad in 1980. Cat 3406 w/ 1,300 hours on the rebuild and a Twin Disc 509 gear. East Hope gurdies, tuna pullers, jig machine and capstan. 6 kW hydraulic generator. Blast freezer on deck and holding plates in the hold. Packs 37,000 lbs in (1) insulated fish hold. (4) fuel tanks w/ 2k gallons total capacity. Electronics include GPS, radar, VHF, sounder, SSB, ComNav autopilot and Wesmar sonar. Diesel stove, (3) berths, full galley, marine head and shower. Asking $400,000 CDN.
$400,000
TR18-050 Trollers
Year: 1980 Length: 47 Hull: Fiberglass Builder: Frosad Location: BC
47'x15'x8' fiberglass freezer troller built by Frostad in 1980. Cat 3406 w/ 1,300 hours on the rebuild and a Twin Disc 509 gear. East Hope gurdies, tuna pullers, jig machine and capstan. 6 kW hydraulic generator. Blast freezer on deck and holding plates in the hold. Packs 37,000 lbs in (1) insulated fish hold. (4) fuel tanks w/ 2k gallons total capacity. Electronics include GPS, radar, VHF, sounder, SSB, ComNav autopilot and Wesmar sonar. Diesel stove, (3) berths, full galley, marine head and shower. Asking $400,000 CDN.
$290,000
SP18-020 Sternpickers
Year: 2000 Length: 32 Hull: Fiberglass Builder: Bay Marine Location: Alaska
32'x14'x36" fiberglass, RSW, flushdeck, Bristol Bay gillnetter built by Bay Marine in 2000. Lugger 6125A rated at 460 hp w/ Twin Disc 509 2:1 gear ratio. 10" bow thruster. Packs 18k lbs in (8) recently re-insulated fish holds. IMS 7.5 ton system w/ (4) separate zones. Kolstrand 48" stern roller and articulating reel w/ levelwind. Electronics include (2) sounders, (2) GPS, radar, TV, VHF, autopilot and many more. Diesel heater, propane stove, (4) berths, shower, head and freezer. Call for a survey. Asking $290,000.
$290,000
BB18-051 Bristol Bay
Year: 2000 Length: 32 Hull: Fiberglass Builder: Bay Marine Location: Alaska
32'x14'x36" fiberglass, RSW, flushdeck, Bristol Bay gillnetter built by Bay Marine in 2000. Lugger 6125A rated at 460 hp w/ Twin Disc 509 2:1 gear ratio. 10" bow thruster. Packs 18k lbs in (8) recently re-insulated fish holds. IMS 7.5 ton system w/ (4) separate zones. Kolstrand 48" stern roller and articulating reel w/ levelwind. Electronics include (2) sounders, (2) GPS, radar, TV, VHF, autopilot and many more. Diesel heater, propane stove, (4) berths, shower, head and freezer. Call for a survey. Asking $290,000.
$90,000
BP18-009 Bowpickers
Year: 1989 Length: 30 Hull: Aluminum Builder: La Conner Boat Works Location: Washington
30'x10.5'x36" aluminum bowpicker build by Laconner Boat Works in 1989. Volvo 41 rated at 200 hp w/ Volvo 290 dual prop outdrive. (2) insulated fish holds w/ (4) brailers each, can pack 6k lbs total. Twin 6 GPM hydraulic pumps. Aluminum reel w/ levelwind. (2) steering stations. Electronics include GPS, radar, sounder, plotter and (2) VHF radios. Diesel stove, sink and (2) berths. Asking $90,000.
$45,000
PK15-005 Boat/Permit Pkgs
Year: 1949 Length: 48 Hull: Wood Builder: K Carter Location: California
48.6'x14'x6' combination California troll/crab package built in 1949 by K Carter. GMC 471 main rated at 190 hp. Capitol gear. Nassau 8 kw generator. 5,000 pound crab tank with a hydraulic lift. 4,000 pound insulated slush salmon tank. Stainless steel hayrack with 3 spool Kolstrand gurdies. Electronics include a Furuno 1650 GPS, Icom VHF, Furuno 48 mile radar, Raytheon sounder and a ComNav autopilot. Comes with a CA salmon troll permit. 250 pot crab permit and approx 190 pots available. Asking $45,000.
$45,000
CR15-012 Crabbers
Year: 1949 Length: 48 Hull: Wood Builder: K Carter Location: California
48.6'x14'x6' combination California troll/crab package built in 1949 by K Carter. GMC 471 main rated at 190 hp. Capitol gear. Nassau 8 kw generator. 5,000 pound crab tank with a hydraulic lift. 4,000 pound insulated slush salmon tank. Stainless steel hayrack with 3 spool Kolstrand gurdies. Electronics include a Furuno 1650 GPS, Icom VHF, Furuno 48 mile radar, Raytheon sounder and a ComNav autopilot. Comes with a CA salmon troll permit. 250 pot crab permit and approx 190 pots available. Asking $45,000.
$45,000
TR15-010 Trollers
Year: 1949 Length: 48 Hull: Wood Builder: K Carter Location: California
48.6'x14'x6' combination California troll/crab package built in 1949 by K Carter. GMC 471 main rated at 190 hp. Capitol gear. Nassau 8 kw generator. 5,000 pound crab tank with a hydraulic lift. 4,000 pound insulated slush salmon tank. Stainless steel hayrack with 3 spool Kolstrand gurdies. Electronics include a Furuno 1650 GPS, Icom VHF, Furuno 48 mile radar, Raytheon sounder and a ComNav autopilot. Comes with a CA salmon troll permit. 250 pot crab permit and approx 190 pots available. Asking $45,000.
$575,000
PK18-023 Boat/Permit Pkgs
Year: 1947 Length: 49 Hull: Wood Builder: Tacoma Boatyard Location: Oregon
49'x13.8'x8' wood combination vessel rigged for crab/tuna/salmon. Home built by Tacoma Boatyard shipwright in 1947. NH250 Cummins main rated at 250 hp, rebuilt in 2017. Twin Disc 509 gear, rebuilt in 2017. 20kW Northern Light genset, new in 2016. Fuel capacity of 1,500 gallons in (3) tanks. Packs 14,000# crab in aluminum insert. Includes complete deck equipment for crab, salmon, and tuna. Electronics include Garmin GPS, VHF, radar, sounder, plotter, and ComNav autopilot. INCLUDES CA/OR salmon permits, 450 pot CA crab permit good to 54'. Crab pots available. Call for survey. Asking $575,000.
$1,400,000
CO18-036 Combination
Year: 1980 Length: 98 Hull: Steel Builder: Bender Location: Alaska
98'x24'x10' steel crabber/combination vessel built by Bender in 1980. Cat 3412 main engine rated at 624 hp, with minimal hours since re-build. Twin DIsc 520 gear with 6.11:1 ratio. (2) John Deere 6081, 175 kW gensets, and (1) Isuzu genset. Packs 200K# in (2) tanks with 40 ton RSW system. Deck equipment includes Marco King Hauler, Greensen deck crane estimated at 2,000#, and bait chopper. Electronics include (3) VHF, (2) radar, sounder, autopilot, GPS, and Nobel Tec navigation system. Call for survey. Asking $1,400,000.
$1,400,000
DR18-006 Draggers
Year: 1980 Length: 98 Hull: Steel Builder: Bender Location: Alaska
98'x24'x10' steel crabber/combination vessel built by Bender in 1980. Cat 3412 main engine rated at 624 hp, with minimal hours since re-build. Twin DIsc 520 gear with 6.11:1 ratio. (2) John Deere 6081, 175 kW gensets, and (1) Isuzu genset. Packs 200K# in (2) tanks with 40 ton RSW system. Deck equipment includes Marco King Hauler, Greensen deck crane estimated at 2,000#, and bait chopper. Electronics include (3) VHF, (2) radar, sounder, autopilot, GPS, and Nobel Tec navigation system. Call for survey. Asking $1,400,000.
$1,400,000
CR18-050 Crabbers
Year: 1980 Length: 98 Hull: Steel Builder: Bender Location: Alaska
98'x24'x10' steel crabber/combination vessel built by Bender in 1980. Cat 3412 main engine rated at 624 hp, with minimal hours since re-build. Twin DIsc 520 gear with 6.11:1 ratio. (2) John Deere 6081, 175 kW gensets, and (1) Isuzu genset. Packs 200K# in (2) tanks with 40 ton RSW system. Deck equipment includes Marco King Hauler, Greensen deck crane estimated at 2,000#, and bait chopper. Electronics include (3) VHF, (2) radar, sounder, autopilot, GPS, and Nobel Tec navigation system. Call for survey. Asking $1,400,000.
$1,400,000
TE18-018 Tenders
Year: 1980 Length: 98 Hull: Steel Builder: Bender Location: Alaska
98'x24'x10' steel crabber/combination vessel built by Bender in 1980. Cat 3412 main engine rated at 624 hp, with minimal hours since re-build. Twin DIsc 520 gear with 6.11:1 ratio. (2) John Deere 6081, 175 kW gensets, and (1) Isuzu genset. Packs 200K# in (2) tanks with 40 ton RSW system. Deck equipment includes Marco King Hauler, Greensen deck crane estimated at 2,000#, and bait chopper. Electronics include (3) VHF, (2) radar, sounder, autopilot, GPS, and Nobel Tec navigation system. Call for survey. Asking $1,400,000.
$100,000
BB18-050 Bristol Bay
Year: 1990 Length: 32 Hull: Aluminum Builder: Elliot Metal Fabricators Location: Alaska
32'x12'x14" aluminum, top house, flush deck, Bristol Bay gillnetter built by Elliot Metal Fab. in 1990. Cat 3116 rated at 300 hp connected to a Hamilton 291 jet. Maritime Fab stern roller, sliding reel w/ auto levelwind and Twister drive. Packs 12k lbs in 13 fish holds. Direct drive 16 gpm hydraulic pump engaged by pto. Electronics include (3) VHF, (3) GPS, sounder, and CB radio. Red Dot heater, (3) berths, plus day bunk in top house, marine toilet, shower and fridge. Call for a survey. Asking $100,000.
$200,000
PK18-022 Boat/Permit Pkgs
Year: 1924 Length: 47 Hull: Wood Location: Oregon
47'x12.6'x5.8' wood crabber/troller, built 1924 in Friday Harbor, WA. Detroit 671 main rated at 165 hp. Twin Disc 509 gear. Mitsubishi 13 kW genset. Fuel capacity of 1,100 gallons in (2) tanks. Fish hold packs 17,000# salmon and 7,500# crab in aluminum insert. Includes (2) NW crab blocks, salmon gurdies, tuna pullers, and 100 crab pots. Electronics include (2) GPS, (2) VHF, radar, (2) sounders, plotter, and ComNav 1001 autopilot. CA and OR salmon troll permits and OR 300 pot crab permit good to 47' max INCLUDED, CA 500 pot permit good to 52' available. Call for survey. Asking $200,000.
$200,000
TR18-049 Trollers
Year: 1924 Length: 47 Hull: Wood Location: Oregon
47'x12.6'x5.8' wood crabber/troller, built 1924 in Friday Harbor, WA. Detroit 671 main rated at 165 hp. Twin Disc 509 gear. Mitsubishi 13 kW genset. Fuel capacity of 1,100 gallons in (2) tanks. Fish hold packs 17,000# salmon and 7,500# crab in aluminum insert. Includes (2) NW crab blocks, salmon gurdies, tuna pullers, and 100 crab pots. Electronics include (2) GPS, (2) VHF, radar, (2) sounders, plotter, and ComNav 1001 autopilot. CA and OR salmon troll permits and OR 300 pot crab permit good to 47' max INCLUDED, CA 500 pot permit good to 52' available. Call for survey. Asking $200,000.
$200,000
CR18-049 Crabbers
Year: 1924 Length: 47 Hull: Wood Location: Oregon
47'x12.6'x5.8' wood crabber/troller, built 1924 in Friday Harbor, WA. Detroit 671 main rated at 165 hp. Twin Disc 509 gear. Mitsubishi 13 kW genset. Fuel capacity of 1,100 gallons in (2) tanks. Fish hold packs 17,000# salmon and 7,500# crab in aluminum insert. Includes (2) NW crab blocks, salmon gurdies, tuna pullers, and 100 crab pots. Electronics include (2) GPS, (2) VHF, radar, (2) sounders, plotter, and ComNav 1001 autopilot. CA and OR salmon troll permits and OR 300 pot crab permit good to 47' max INCLUDED, CA 500 pot permit good to 52' available. Call for survey. Asking $200,000.
$420,000
SE18-020 Seiners
Year: 1978 Length: 57 Hull: Wood Builder: Wahl Location: Washington
57'x18'x10' wood seiner built by Wahl in 1978. Cummins 855 rated at 300 hp w/ Twin Disc gear, approx 3k hrs. Perkins 45 kW and Kabota 27 kW gensets both w/ low hours. Aluminum top house and bulwarks. All new RSW system w/ (2) compressors. Insulated fish hold packs 80k lbs. Pilkington deck winch, new steering, aluminum hatch cover, winches, cables, A-frame mast, picking boom and main boom w/ slider. All new electronics include, radar, autopilot, sounder, plotter and sat-phone and sat-TV. (2) state rooms, (7) berths, new floor, electric stove, marine head, and hot water heater. Excellent condition throughout. Asking $420,000.
$200,000
TE18-017 Tenders
Year: 1965 Length: 145 Hull: Steel Builder: American Marine Corp Location: Washington
145’x35’x11’ steel tender vessel built in 1965 by American Marine Corp in New Orleans. Vessel operated for a number of years as a Bering Sea crab vessel. Twin Cat D398 main engines rated at 850 hp each with Cat 3192 reverse reduction gears. (2) MTU 585 kW gensets and (1) Cummins 150 kW genset. Holds 54K gallons fuel in (5) steel tanks. Packs 200k# crab, 500k# salmon in (4) tanks. Large galley with Imperial (6) burner oven. Accomodations for (12). (2) deck cranes, (1) straight boom, (1) knuckle boom. Full electronics package. Call for survey. Asking $200,000.
$575,000
TN18-020 Tuna
Year: 1947 Length: 49 Hull: Wood Builder: Tacoma Boatyard Location: Oregon
49'x13.8'x8' wood combination vessel rigged for crab/tuna/salmon. Home built by Tacoma Boatyard shipwright in 1947. NH250 Cummins main rated at 250 hp, rebuilt in 2017. Twin Disc 509 gear, rebuilt in 2017. 20kW Northern Light genset, new in 2016. Fuel capacity of 1,500 gallons in (3) tanks. Packs 14,000# crab in aluminum insert. Includes complete deck equipment for crab, salmon, and tuna. Electronics include Garmin GPS, VHF, radar, sounder, plotter, and ComNav autopilot. INCLUDES CA/OR salmon permits, 450 pot CA crab permit good to 54'. Crab pots available. Call for survey. Asking $575,000.
$575,000
TR18-048 Trollers
Year: 1947 Length: 49 Hull: Wood Builder: Tacoma Boatyard Location: Oregon
49'x13.8'x8' wood combination vessel rigged for crab/tuna/salmon. Home built by Tacoma Boatyard shipwright in 1947. NH250 Cummins main rated at 250 hp, rebuilt in 2017. Twin Disc 509 gear, rebuilt in 2017. 20kW Northern Light genset, new in 2016. Fuel capacity of 1,500 gallons in (3) tanks. Packs 14,000# crab in aluminum insert. Includes complete deck equipment for crab, salmon, and tuna. Electronics include Garmin GPS, VHF, radar, sounder, plotter, and ComNav autopilot. INCLUDES CA/OR salmon permits, 450 pot CA crab permit good to 54'. Crab pots available. Call for survey. Asking $575,000.
$575,000
CR18-048 Crabbers
Year: 1947 Length: 49 Hull: Wood Builder: Tacoma Boatyard Location: Oregon
49'x13.8'x8' wood combination vessel rigged for crab/tuna/salmon. Home built by Tacoma Boatyard shipwright in 1947. NH250 Cummins main rated at 250 hp, rebuilt in 2017. Twin Disc 509 gear, rebuilt in 2017. 20kW Northern Light genset, new in 2016. Fuel capacity of 1,500 gallons in (3) tanks. Packs 14,000# crab in aluminum insert. Includes complete deck equipment for crab, salmon, and tuna. Electronics include Garmin GPS, VHF, radar, sounder, plotter, and ComNav autopilot. INCLUDES CA/OR salmon permits, 450 pot CA crab permit good to 54'. Crab pots available. Call for survey. Asking $575,000.
$250,000
TR18-047 Trollers
Year: 2005 Length: 41 Hull: Fiberglass Builder: George Vandelft Location: Canada
41'x14'x6' fiberglass combination troller/gillnet/longliner built by George Vandelft in 2005. John Deere 6081 rated at 340 hp connected to a Twin Disc gear w/ 3:1 ratio. New SS exhaust. Bulbous bow and rolling chalks. Easthope gurdies, 25 skate longline drum, hauler and longline spooler. Lifting davit for skiff and nets. Fiberglass fish hold packs 25k lbs of halibut. Removable tank insert. Holds 4k gallons fuel in (4) tanks. Electronics include radar, autopilot, sounder, AIS, (2) computers, gps and inverter. Diesel stove, full size freezer/fridge, marine head w/ shower and (4) berths. Asking $250,000 CDN.
$250,000
CO18-035 Combination
Year: 2005 Length: 41 Hull: Fiberglass Builder: George Vandelft Location: Canada
41'x14'x6' fiberglass combination troller/gillnet/longliner built by George Vandelft in 2005. John Deere 6081 rated at 340 hp connected to a Twin Disc gear w/ 3:1 ratio. New SS exhaust. Bulbous bow and rolling chalks. Easthope gurdies, 25 skate longline drum, hauler and longline spooler. Lifting davit for skiff and nets. Fiberglass fish hold packs 25k lbs of halibut. Removable tank insert. Holds 4k gallons fuel in (4) tanks. Electronics include radar, autopilot, sounder, AIS, (2) computers, gps and inverter. Diesel stove, full size freezer/fridge, marine head w/ shower and (4) berths. Asking $250,000 CDN.
$85,000
UT18-005 Utility
Year: 1981 Length: 42 Hull: Aluminum Builder: Breux's Bay Craft Location: Oregon
42'x14'x4' aluminum crew boat rigged for crab and oil response, built by Breux's Bay Craft in 1981. Twin Detroit 8v71 mains rated at 318 hp each. Allison gears w/ 2:1 ratio. Honda 2000 portable generator. Fluidyne 25 gal hydraulic pump w/ electric clutch. Packs 8,000# crab on deck in (8) totes. Electronics include VHF, (2) GPS, sounder, radar, and plotter. Includes crab block, davit, and dump box. Call for survey. Asking $85,000.
$85,000
CR18-046 Crabbers
Year: 1981 Length: 42 Hull: Aluminum Builder: Breux's Bay Craft Location: Oregon
42'x14'x4' aluminum crew boat rigged for crab and oil response, built by Breux's Bay Craft in 1981. Twin Detroit 8v71 mains rated at 318 hp each. Allison gears w/ 2:1 ratio. Honda 2000 portable generator. Fluidyne 25 gal hydraulic pump w/ electric clutch. Packs 8,000# crab on deck in (8) totes. Electronics include VHF, (2) GPS, sounder, radar, and plotter. Includes crab block, davit, and dump box. Call for survey. Asking $85,000.
$400,000
PK18-021 Boat/Permit Pkgs
Year: 1971 Length: 44 Hull: Steel Builder: Figueiredo Location: California
44'x14.2'x6.5' steel crabber built by Figueiredo in 1971. Cummins main rated at 250 hp, overhauled in 2009. Twin Disc reduction gear. Fuel capacity of 1,700 gal in (3) tanks. Vickers 24 gal and 30 gal hydraulic pumps off fwd/aft PTOs. Packs 19,000# in fish hold, insulated with fiberglass over foam. Electronics include GPS, (3) VHF, radar, Furuno sounder, plotter, and 3000w inverter. INCLUDES CA 400 pot crab permit good to 44' (+5'), crab block, and approx. 350 crab pots. Call for survey. Asking $400,000.
$400,000
CR18-047 Crabbers
Year: 1971 Length: 44 Hull: Steel Builder: Figueiredo Location: California
44'x14.2'x6.5' steel crabber built by Figueiredo in 1971. Cummins main rated at 250 hp, overhauled in 2009. Twin Disc reduction gear. Fuel capacity of 1,700 gal in (3) tanks. Vickers 24 gal and 30 gal hydraulic pumps off fwd/aft PTOs. Packs 19,000# in fish hold, insulated with fiberglass over foam. Electronics include GPS, (3) VHF, radar, Furuno sounder, plotter, and 3000w inverter. INCLUDES CA 400 pot crab permit good to 44' (+5'), crab block, and approx. 350 crab pots. Call for survey. Asking $400,000.
$195,000
BP18-008 Bowpickers
Year: 1991 Length: 32 Hull: Aluminum Builder: Master Marine Location: Alaska
32'x12'x24" aluminum, flush deck, RSW, bowpicker built by Master Marine in 1991. New Cummins QSM11 rated at 450 hp installed in 2017. Hamilton 362 14" jet connected to direct drive gear w/ Pitts clutch and 1:1 ratio. Pac West 7.5 ton RSW system. Dual zoned system packs 13k lbs in (10) insulated fish holds. Sliding reel w/ Rex Roth drive, Kinematics auto leverwind and power roller. 6 cube and 4.8 cube load sensing hydraulic pumps. Electronic include (3) GPS, radar, (2) VHF and inverter. (3) berths, diesel stove and sink. Call for a survey. Asking $195,000.
$195,000
BB18-047 Bristol Bay
Year: 1991 Length: 32 Hull: Aluminum Builder: Master Marine Location: Alaska
32'x12'x24" aluminum, flush deck, RSW, bowpicker built by Master Marine in 1991. New Cummins QSM11 rated at 450 hp installed in 2017. Hamilton 362 14" jet connected to direct drive gear w/ Pitts clutch and 1:1 ratio. Pac West 7.5 ton RSW system. Dual zoned system packs 13k lbs in (10) insulated fish holds. Sliding reel w/ Rex Roth drive, Kinematics auto leverwind and power roller. 6 cube and 4.8 cube load sensing hydraulic pumps. Electronic include (3) GPS, radar, (2) VHF and inverter. (3) berths, diesel stove and sink. Call for a survey. Asking $195,000.
$195,000
TR18-046 Trollers
Year: 1978 Length: 73 Hull: Steel Builder: Carroll Hoeppner Location: Oregon
73'x22'x7' steel tuna troller built by Carroll Hoeppner in 1978. Twin Detroit 6-71 w/ 360 hp total. Twin Disc gears w/ 4.5:1 ratio. Isuzu 40 kW and 35 kW gensets. Spray brine system freezes 4 tons/day. Packs 50 tons in (1) insulated fish hold. Lyon's hydraulic fish pullers. Electronics include sonar, autopilot, redundant radar, VHF, computer, plotter and sonar. Spacious galley, (2) staterooms, marine head, and shower. Asking $195,000.
$195,000
TN18-019 Tuna
Year: 1978 Length: 73 Hull: Steel Builder: Carroll Hoeppner Location: Oregon
73'x22'x7' steel tuna troller built by Carroll Hoeppner in 1978. Twin Detroit 6-71 w/ 360 hp total. Twin Disc gears w/ 4.5:1 ratio. Isuzu 40 kW and 35 kW gensets. Spray brine system freezes 4 tons/day. Packs 50 tons in (1) insulated fish hold. Lyon's hydraulic fish pullers. Electronics include sonar, autopilot, redundant radar, VHF, computer, plotter and sonar. Spacious galley, (2) staterooms, marine head, and shower. Asking $195,000.
$185,000
BB18-046 Bristol Bay
Year: 1980 Length: 32 Hull: Aluminum Builder: Marco Location: Alaska
32'x12' Marco Bristol Bay boat, built in 1980. 330 hp Lugger installed 1992, appr 8,500 hrs. 7.5 ton Pac West RSW system, engine room installation, new in 2014. New Micro Command controls. Rebuilt anchor winch and power roller. Curry articulating drum. Packs 10k lbs, fish holds insulated and glassed in 2012. Garmin 162 GPS, Furuno radar, (3) VHF, and more. Good opportunity for a repowered and refrigerated Marco. Asking $185,000.
$45,000
PL18-007 Pleasure
Year: 1985 Length: 41 Hull: Fiberglass Builder: DeFever Location: Washington
41'x14'x3' fiberglass tri-cabin trawler style pleasure boat, built by Davis/DeFever in 1985. Twin 6-cylinder Ford Lehman Diesel 120 hp mains w/ 200 hours, and Borg Warner gears. 3kW Empac genset. Fuel capacity of 400 gallons in (2) tanks. Recent upgrades include replacing all through hull fittings, connections, and hoses. New engine room and laz bulkheads. Cabin has (2) staterooms, Dickinson diesel stove, (2) heads, and a shower. Call for survey. Asking $45,000.
$30,000
BB18-045 Bristol Bay
Year: 1959 Length: 32 Hull: Aluminum Builder: Marco Location: Alaska
32'x12' aluminum sternpicker built by Marco in 1959. Detroit 4-53 w/ approx. 5,500 hours. Borg Warner 72C gear. Sound Marine roller, aluminum reel w/ Twister drive. Vickers V-20 hydraulic pump and belt drive wash down pump. (2) 100 gallon fuel tanks. Electronics include GPS, VHF, radar and depth sounder. Asking $30,000.
$30,000
SP18-019 Sternpickers
Year: 1959 Length: 32 Hull: Aluminum Builder: Marco Location: Alaska
32'x12' aluminum sternpicker built by Marco in 1959. Detroit 4-53 w/ approx. 5,500 hours. Borg Warner 72C gear. Sound Marine roller, aluminum reel w/ Twister drive. Vickers V-20 hydraulic pump and belt drive wash down pump. (2) 100 gallon fuel tanks. Electronics include GPS, VHF, radar and depth sounder. Asking $30,000.
$85,000
PL18-006 Pleasure
Year: 1973 Length: 36 Hull: Fiberglass Builder: Genmar Yacht Group Location: Washington
36'x13'x5' twin-screw fiberglass pleasure craft built by Genmar Yacht Group in 1973, rebuilt inside and out by Little Hoquiam. Twin Cat 3116 main engines rated at 350 hp each. ZF 220 gears with 1.53:1 ratio. (3) steering stations, (2) bronze spade-style rudders, (2) 4-blade bronze propellers. Cruises at 20 knots. 400 gallons fuel capacity in (4) aluminum tanks. 100 gallons fresh water capacity in (1) aluminum tank. Aft deck overlaid with teak strip decking. Galley includes propane stove top, stainless steel sink, refrigerator, and microwave, with adjacent setee. Stateroom with (2) stacked berths. Sleeps (2) additional in fo'c'sle. Electronics include (2) VHF, radar, sounder, and plotter. Very clean vessel with comfortable accommodations. Call for survey. Asking $85,000.
$150,000
SE18-043 Seiners
Year: 1946 Length: 64.5 Hull: Wood Builder: Tacoma Boat Works Location: Washington
64.5'x18'x8' grandfathered limit seiner rigged as crabber/tender, built by Tacoma Boat Works in 1946. CAT D343 main w/ Twin Disc 514 gear. Isuzu 40 kw genset. 3,600 gallon fuel capacity in (4) tanks. Packs 78,000 lbs in (2) tanked, insulated holds. 30 ton RSW system, chills both fish holds. Deck equipment includes aluminum tuna poles, crab block, bait chopper, line coiler, and pot pump. Electronics include VHF, Garmin GPS, (2) Furuno radars, and Freeman autopilot. CA salmon permit available. Call for survey. Asking $150,000.
$150,000
CR18-043 Crabbers
Year: 1946 Length: 64.5 Hull: Wood Builder: Tacoma Boat Works Location: Washington
64.5'x18'x8' grandfathered limit seiner rigged as crabber/tender, built by Tacoma Boat Works in 1946. CAT D343 main w/ Twin Disc 514 gear. Isuzu 40 kw genset. 3,600 gallon fuel capacity in (4) tanks. Packs 78,000 lbs in (2) tanked, insulated holds. 30 ton RSW system, chills both fish holds. Deck equipment includes aluminum tuna poles, crab block, bait chopper, line coiler, and pot pump. Electronics include VHF, Garmin GPS, (2) Furuno radars, and Freeman autopilot. CA salmon permit available. Call for survey. Asking $150,000.
$350,000
BB18-043 Bristol Bay
Year: 1991 Length: 32 Hull: Aluminum Builder: Baycraft Location: Alaska
32'x15'x37" aluminum, flush deck, RSW, Bristol Bay gillnetter built by Baycraft in 1991. Twin Volvo 122D w/ 1000 hp combined. ZF RM310 gears rebuilt in 2012 w/ 1.79:1 ratio. New IMS 8.5 ton RSW chills 15k lbs in (6) recently insulated fish holds. Packs 20,000 lbs total. 500 gallons fuel in (2) tanks. Custom reel, Rex Roth drive, Maritime levelwind and roller. New brailers. Complete electronics package. Spacious galley, (4) berths plus day bunk, Red Dot heater, shower and head. Available after the 2019 season. Call for survey. Asking $350,000.
Web Design, 3 Crown Creative