Crabbers[57 listings]

Click here to be notified of updates to the Crabbers pagewatch helphelp
« first ‹ previous next › last »
Vessels 1 - 50 of 57
$170,000
thumbnail CR17-039  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1953    Length: 42    Hull: Wood    Location: California
42'x14'x7.7' wood crabber/troller, built 1953 in Aberdeen, WA. Detroit 6-71 rated at 180 hp. Twin Disc 509 gear. Isuzu 20 kw genset. Fuel capacity of 400 gallons in (4) tanks. Packs 3,000 lbs crab in aluminum insert. Electronics include (2) GPS, VHF, radar, sounder, Garmin plotter, and Raymarine autopilot. Comes with gurdies, salmon troll gear, crab block, and 175 pots. Includes 175 pot CA crab permit good to 48' and never stretched. Asking $170,000.
$185,000
thumbnail CR17-038  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1973    Length: 38    Hull: Fiberglass    Builder: Delta/LeClercq    Location: Alaska
38'x13'x3' fiberglass Delta/Leclerq, built in 1973. John Deere 6068 main rated at 201 hp, with approx. 5,000 hrs. Twin Disc 506 gear. Honda 3,000 generator. Packs 25,000 lbs in (3) insulated holds. Aluminum reel w/ levelwind and Twister drive, crab block, and (2) sodium crab lights. Electronics include (2) GPS, (2) VHF, 2-meter, Furuno radar, (2) sounders, Dell laptop w/ Nobeltec, and ComNav 1001 autopilot w/ (4) micro commanders. Call for recent survey. Asking $185,000.
$400,000
thumbnail CR17-037  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1982    Length: 30    Hull: Fiberglass    Builder: Cloudburst    Location: California
30'x12'x3' fiberglass crabber built by Cloudburst in 1982. Detroit 6V53 rated at 200 hp. Twin Disc 502 gear w/ 1.5:1 ratio. 12 GPH hydraulic pump off reduction gear. Warren Junes 15" crab block recently rebuilt. Packs 2,500 lbs crab in fiberglass fish hold. Includes (375) 36" crab pots, 16' gear trailer, pot pump, totes and more. Electronics include GPS, radar, sounder, VHF and plotter. (2) berths, electric heater. Permits included CA 450 pot crab permit good to 35' and CA Salmon. Total package for $400,000.
$240,000
thumbnail CR17-036  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1973    Length: 46    Hull: Fiberglass    Builder: Thermodyne    Location: Alaska
46'x14.6'x7.6' fiberglass combination vessel rigged for gillnet/crab/troll. Built by Thermodyne in 1973. GMC 8V-71 main rated at 318 hp, w/ approx 4,500 hrs. Twin Disc 512 gear. Perkins 4/236 aux w/ 12 kW Northern Lights gen set. Packs 30,000 lbs in (4) insulated fish holds. Gillnet reel, 19" Warren Junes crab block, and (2) Kolstrand troll gurdies. Electronics include (2) GPS, VHF, 2-meter, Furuno radar, Furuno 585 sounder, and Simrad AP35 autopilot. Steering system overhaul in 2017. Fully rigged for multiple fisheries. Asking $240,000.
$219,000
thumbnail CR17-035  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1953    Length: 65    Hull: Steel    Builder: National Ship and Steel    Location: Washington
65'x18'x9' steel tuna freezer vessel built by National Ship and Steel Building to military specifications for the US Army as a towing vessel. Cummins model 855 300 hp main with Twin Disc MG-514-C, 3.5:1 gear. 50 kw John Deere/MER aux. 4,600 gal. fuel capacity in (6) tanks. 1,300 cu. ft. freezer hold. (2) 75 cu. ft. brine/bait tanks on deck. IMS RSW for brine tanks and blast freeze in freezer hold. 5 spool Jerry Risley tuna gurdies. Aluminum bait tank. Complete electronics package including sonar. (2) staterooms, (6) berths, diesel stove and electric range. Call for complete survey. Asking $219,000.
$315,000
thumbnail CR17-034  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1979    Length: 42    Hull: Fiberglass    Builder: Delta    Location: Washington
42'x14'x3.5' fiberglass crabber/seiner built by Delta in 1979, complete refit and tophouse added in 2012. Cummins 6CTA main rated at 255 hp, w/ 2,500 hours. Twin Disc 509 gear. 15 kw Isuzu genset w/ 2,800 hrs. Tanked fish hold packs 10,000 lbs crab. Deck equipment includes main boom, picking booms, Kolstrand seine winch, trolling poles, and 15" crab block. Electronics include (2) VHF, Sat-phone, GPS, Furuno Nav Net VX-2 radar/plotter/sounder, IBM computer w/ Coastal Explorer, and ComNav 1001 autopilot. WA 300 pot crab permit good to 42' and gear available. Very clean boat with many upgrades. Call for more information. Asking $315,000.
$225,000
thumbnail CR15-012  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1949    Length: 48.6    Hull: Wood    Builder: K Carter    Location: California
48.6'x14'x6' combination California troll/crab package built in 1949 by K Carter. GMC 471 main rated at 190 hp. Capitol gear. Nassau 8 kw generator. 5,000 pound crab tank with a hydraulic lift. 4,000 pound insulated slush salmon tank. Stainless steel hayrack with 3 spool Kolstrand gurdies. Electronics include a Furuno 1650 GPS, Icom VHF, Furuno 48 mile radar, Raytheon sounder and a ComNav autopilot. Comes with a CA 250 pot permit good to 53.6' LOA, approximately 200 pots and a CA salmon troll permit. Asking $225,000.
$1,200,000
thumbnail CR17-024  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1981    Length: 58    Hull: Fiberglass    Builder: Delta    Location: Alaska
58'x19.5' Delta combination seiner/pots/tender built in 1981. CAT 3408 main w/ 365 hp and Twin Disc MG-514C. John Deere 4-cylinder 40 kW and Mitsubishi 25 kW auxiliaries. Anderson 15 ton RSW system w/ titanium chiller. Packs approx. 90k lbs with RSW and 10k lbs without RSW. Bulbous bow and rolling chocks. Complete deck equipment for seine and pot fisheries. Electronics include (2) GPS, (3) VHF, (2) SSB, CB, and two meter radios, (2) radar, sounder, sonar, Trac phone, and ComNav autopilot. Turn key package with skiff and Area M seine included. Call for complete survey. Asking $1,200,000.
$75,000
thumbnail CR17-033  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1966    Length: 58    Hull: Steel    Builder: Rockport Yacht and Supply    Location: Alaska
58'x18'x8' steel longliner/crabber built in 1966 by Rockport Yacht and Supply,Texas. Detroit 8-71 main rated at 318 hp. Allison MH45R gear. Kubota 27 kW genset. 3,000 gallon fuel capacity in (2) steel tanks. Packs 80,000 lbs in (2) fish holds, with additional bait hold. Electronics include GPS, (2) VHF, SSB, (2) Furuno radars, Furuno sounder, and Wagner autopilot. All deck equipment for longline and crab fisheries included. King/Tanner crab pots available. Call for survey and list of recent repairs. Asking $75,000.
$65,000
thumbnail CR17-031  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1987    Length: 32    Hull: Aluminum    Builder: La Conner Boat Works    Location: Oregon
32'x10' aluminum crab/longline/dive vessel built by LaConner Boat in 1987. Volvo ADP41A 220 hp main with 800 hours since complete professional rebuild in 2010. Custom 3-axle trailer. Rigged for coastal crab, longline, and troll. 16" hauler, 14" crab block, and gurdies, and troll gear. Electronics include VHF, sounder, auto pilot, and GPS. Oregon salmon permit included. Asking $65,000.
$225,000
thumbnail CR17-030  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1967    Length: 49.5    Hull: Fiberglass    Builder: Rawson    Location: Washington
49.5'x14'x6' fiberglass combination crab/troll/seiner built by Rawson in 1967. GMC 8V71 rated at 250 hp w/ low hours on the rebuild. Allison gear. Kubota V3800 40 kw genset. Packs 13k lbs of crab in (2) fiberglass fish holds. New bulbous bow. 30 hp electric motor drives 25 gallon hydraulic pump. 17" Warren Junes crab block, davit, ram and aluminum dump box. Electronic include GPS, (2) VHF, laptop w/ navigation, Furuno radar, sounder and (2) engine room cameras. Call for a survey. Reduced to $225,000.
$550,000
thumbnail CR17-029  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1944    Length: 68    Hull: Wood    Builder: Kirkland Marine Construction    Location: Washington
68'x19'x8.7' wood crabber and shrimp trawl package, built by Kirkland Marine Construction in 1944. Detroit 12V-71 rated at 360 hp w/ 2,300 hours since 2015 rebuild. Twin Disc MG 514 gear. 40 kw Isuzu genset. 2,500 gallon fuel capacity in (4) tanks. Fish hold insert packs 30,000 lbs crab. Electronics include (3) VHF, (2) SSB, (2) GPS, (2) radars, (3) sounders, and computer w/ Coastal Explorer. 500 dungeness crab pots, (4) shrimp trawl nets, and complete deck equipment. Package INCLUDES WA 500 pot crab permit good to 78', and WA coastal shrimp trawl permit. Asking $550,000 for everything.
$1,200,000
thumbnail CR17-028  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2012    Length: 45    Hull: Fiberglass    Builder: Millennium Marine    Location: California
45'x16'x7' fiberglass lobster style vessel built by Millennium Marine in 2012. Complete California crab package INCLUDING 500 pot permit. Isuzu main rated at 505 hp w/ ZF 360A gear. 65 kw John Deere, w/ 40 gpm Spencer hydraulic pump. Packs 20,000 lbs crab below deck in (7) insulated, tankable fish holds. All deck equipment and gear included for crab, troll, and longline fisheries. Full electronics package. Permits include 500 pot CA crab permit good to 56' max LOA, CA salmon, and unlimited OR salmon troll. Call for survey and complete list of gear. Asking $1,200,000.
$990,000
thumbnail CR17-027  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1989    Length: 58    Hull: Fiberglass    Builder: Gooldrup    Location: Washington
58'x17' fiberglass combination seiner/trawl vessel built by Mike Gooldrup in 1989, and complete refit by Delta Marine in 2012. Detroit 12V-71 rated at 340 hp w/ approx 3,000 hours on the rebuild. Twin Disc PTO w/ (3) pumps and MG 516 gear w/ 4.5:1 ratio. 40 kw John Deere, new in 2014. Packs 70,000 lbs in main hold, aft hold currently houses slurry ice machine. New mast and rigging, Pilkington self pursing winch, and seine davits. Electronics package includes Simrad autopilot, Furuno GPS, radar, and sounder. Puget Sound shrimp beam trawl permit and gear available. Very clean and well maintained boat. Call for survey and complete list of work done by Delta Marine. Asking $990,000.
$20,000
thumbnail CR17-023  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1973    Length: 26    Hull: Fiberglass    Builder: Modutech    Location: Washington
26'x11' Modutech bowpicker, rigged for gillnetting, trolling, and pot fishing. Perkins 6-354T diesel rated at 275 hp. Borg Warner Velvet Drive gear. Drum and mast included. Reportedly packs 10,000#. Asking $20,000.
$75,000
thumbnail CR17-020  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1970    Length: 28.7    Hull: Fiberglass    Builder: CandM Manufacturing    Location: California
28.7'x10'x3' fiberglass cruiser rigged for crab and trolling, built by CandM Manufacturing in 1970. Cummins 6BTA main rated at 330 hp w/ low hours. Twin Disc MG5061. Fuel capacity of 180 gallons in (2) tanks. Aluminum mast and trolling poles, (2) double hydraulic gurdies, crab block, and electric wash down pumps. Electronic equipment includes GPS, VHF, radar, sounder, and Raypilot 650 autopilot. CA salmon troll and CA 250 pot crab permit included, good to 28.7' max LOA. Asking $75,000 for the package.
$1,100,000
thumbnail CR17-019  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1993    Length: 55.5    Hull: Steel    Builder: Ratliff    Location: Oregon
55.5'x17.5' steel combination vessel, built in 1993 by Ratliff Bros. Rigged for crab, longline and troll. 855 Cummins w/ TD 514, 50 kW 4039 John Deere gen set. Electronics include (2) radar, (2) GPS, (2) SSB, (2) VHF, sounder, sat phone, ComNav auto pilot, and more. Accommodations for 5 crew. Deck gear includes bait chopper, 19" Junes block, Junes roller, Kolstrand longline drum and more. Hull recently blasted to cap rails. New fish hold, stainless fuel lines, and all fuel tanks cleaned in 2015. Holds 26,000# crab, 45,000# halibut w/ ice, 25 tons of tuna.  SOLAS 6 man raft (3 yrs old). Package INCLUDES Oregon 500 pot crab permit, fully rigged Trilogy pots and 24 foot trailer for pots. All good gear, no junk. Really clean boat, all in excellent condition. Asking $1,100,000 for everything.
$265,000
thumbnail CR17-018  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1990    Length: 57.1    Hull: Wood    Builder: Zirlott Boatyard    Location: Alaska
57.1'x18.6'x9.1' wood combination vessel rigged for tendering, longline, and pots. Built in 1990 by Zirlott Shipyard. Cummins NTA855 main rated at 350hp. Twin Disc gear with PTO. Perkins 30kw generator, rebuilt 2015. Packs 50k lbs in RSW, and 30k lbs iced. 18 ton RSW system w/ titanium chiller, new in 2015. Electronics include (2)VHF, SSB, ComNav autopilot, Dell computer, and Garmin GPS, radar, and sounder. Asking $265,000.
$130,000
thumbnail CR17-017  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1973    Length: 27    Hull: Fiberglass    Builder: Snowball    Location: California
27'x9' fiberglass crabber built by Snowball in 1973. 225 hp Honda outboard w/ 600 rebuilt hours. Top speed 30 kts, cruises at 20 kts. Holds 100 gallons fuel in (1) tank. Packs 2,500 lbs crab in deck totes. Hydraulics powered by Honda powerpack. Deck equipment includes 12" block, and aluminum davit, sort table, and dump box. Electronics include VHF, and Garmin 720s package w/ GPS, radar, sounder, and sonar. Package deal w/ 250 pot CA crab permit good to 30' LOA and 225 pots. Asking $130,000 for full package.
$55,000
thumbnail CR17-009  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1959    Length: 37    Hull: Aluminum    Builder: Marco    Location: California
37'x12' aluminum crabber built by Marco in 1959. 8.2L Detroit diesel rated at 200 hp. Borg Warner 2.5:1 reduction gear. Fish hold insert packs 7k lbs of live crab. 17" Warren Junes power block. Electronics include GPS, VHF, radar, and sounder. 275 pots available to buyer. Asking $55,000.
$35,000
thumbnail CR17-015  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1976    Length: 29    Hull: Fiberglass    Builder: Modutech    Location: Oregon
29.1'x11.9' fiberglass combination crab/salmon/longliner built by Modutech in 1976. Perkins 6.354 rated at 160 hp. Borg Warner gear w/ 1.9:1 ratio. 300 gallon fuel capacity in (2) tanks. 17" Warren Junes crab block. Jim Harrison longline hauler. Salmon gurdies, aluminum poles and floppers. Packs 6,000 lbs of crab. Electronics include Furuno 1870F combo, autopilot, VHF, inverter and radar. OR endorsed nearshore permit available. Price reduced to $35,000 obo.
$450,000
thumbnail CR17-012  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1968    Length: 50    Hull: Steel    Builder: Martin Allen    Location: California
50'x15.9' steel combination crab/tuna/troller built by Martin Allen in 1968. Cummins N14 rated at 480 hp. Twin Disc 514 gear w/ 3:1 ratio. Isuzu 40kw aux. 10 ton spray brine system w/ new compressor and rebuilt pump. Packs 24k lbs crab, 20 tons of tuna in main hold and 10 tons in (5) smaller holds. (4) bait wells, bait racks, (2) large bait tanks and shed. (2) 3 spool salmon gurdies and (2) 5 spool Alliance SS tuna gurdies. Crab block, davit and (350) rigged 38" pots. Warren Junes hydraulics w/ electric clutch and a crab pump. 2,400 gallons fuel in (4) tanks. Complete electronics package including a new sonar dome and autopilot. Permits include CA Crab 350 pot, CA and OR Salmon Troll and a Swordfish permit w/ new net. Call for a survey. Price reduced to $450,000.
$1,000,000
CR17-011  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1981    Length: 96    Hull: steel    Builder: Columbia Shipbuilders    Location: Alaska
96'x28'x8.5' steel crabber/tender, built in 1981 by Columbia Shipbuilding. Twin Cummins KTA 1150 mains rated at 400 hp ea. Cat 3306 185 kW, Cat 3306 125 kW, and Deere 55 kW gen sets. Packs 300,000# in two holds w/ RSW. (2) deck cranes (one new). Bait freezer. Full electronics. Flat bottom, shallow draft makes great tender. Contract available. Call for survey. Asking $1,000,000.
$1,100,000
CR17-010  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1945    Length: 133    Hull: steel    Builder: US Army    Location: Alaska
133'x30'x10.3' steel tender/crabber, built for US Army in 1945, converted to crabber/tender in 1978. Twin Cummins KTA 19M2 mains rated at 600 hp ea. Generators include 305 kW GMC 8V92, 275 kW 6V92, and Cummins 128 kW. Packs 450,000# w/ (3) separate RSW systems. Full electronics. Complete tendering setup with all deck gear, cranes, etc. Contract available. Call for survey. Asking $1,100,000.
$165,000
thumbnail CR17-008  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1974    Length: 38    Hull: Fiberglass    Builder: Delta    Location: Alaska
38'x12.9'x3.5' fiberglass combination boat, built by Delta / LeClercq in 1974. Rigged for gillnet, crab and shrimp. 200 hp John Deere w/ appr 4750 hrs. Packs 14,000# salmon. Main and picking booms w/ PL2 winches. 12” crab block. Honda driven circulation. Electronics include GPS, (2) VHF, radar, (2) sounders, ComNav pilot w/ remote. Asking $165,000. Also available are SE drift permit w/ drum and roller, SE Tanner permit, and longline hauler and roller.
$165,000
thumbnail CR17-006  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1946    Length: 40    Hull: Wood    Location: California
40'x12'x4.5' wood combination vessel rigged for crab, longline, and trolling, built in 1946. GMC 671 main 7,000 hours on rebuild. Fuel capacity of 300 gal in (2) tanks. Predator 4000 watt gas generator. 10,000 lbs total hold capacity, 4,200 lbs in aluminum insert crab tank. 17 inch crab block. (2) Kolstrand 3-spool gurdies. Electronics include GPS, VHF, plotter, ComNav 1001 autopilot, and Furuno radar and sounder. Comes w/ all crab, salmon, and longline gear. CA Crab Tier 7 and CA Salmon Troll permits included. Call for complete list. Asking $165,000.
$45,000
thumbnail CO17-005  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1974    Length: 19    Hull: Fiberglass    Builder: Radon    Location: California
19'x8'x2' Radon rigged for crab and salmon troll. 225 hp Honda outboard w/ 450 hrs. New crab block runs on electro-hydraulic system. New 64 gal aluminum fuel tank. Packs 500 lbs. crab below deck. Electronics include VHF, Garmin GPS, plotter, and radar. Permits include 175 pot CA crab good to 19' and CA salmon troll. Comes with trailer. Asking $45,000.
$850,000
thumbnail CR17-003  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1987    Length: 57.5    Hull: Steel    Builder: O.C. Fergusson Ltd    Location: Alaska
57.5'x20'x9' steel combination vessel rigged for seine/longline/pots, built in 1987 by O.C. Fergusson. John Deere 6135 main rated at 425 hp. Twin Disc MG 514C gear w/ 4.5:1 ratio. John Deere 4045 99kw (new 2016) and Isuzu 30kw generators. Bow thruster. 40 ton RSW system. Packs 150,000 in (4) holds. Full electronics package with Trac phone, ComNav autopilot w/ remote, (2) laptops w/ Nobel Tec software, and Lorex (3) camera monitoring system. Call for more information and survey. CG pot and BS LLPs available for possible sale. Price reduced to $850,000.
$295,000
thumbnail CR17-001  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1949    Length: 58    Hull: Steel    Builder: Long Marine    Location: Alaska
58'x16.5'x7' steel seiner/pot boat, built in 1949 by Long Marine. Cat D343 main rated at 330 hp. Isuzu 30 kw gen set. 15 ton IMS RSW system. Electronics include Furuno radar, (2) VHF, (2) GPS, Furuno sounder, ComNav autopilot, computer w/ NobelTec. Packs appr. 80,000#. New galley appliances. Price reduced to $295,000.
$775,000
thumbnail CR16-026  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1974    Length: 58    Hull: wood/steel    Builder: Marine View Boat Bldg Co    Location: Alaska
58'x19.6' combination seine/crab built by Marine View in 1974. Major reconstruction in 2014-15. GMC 12V-71 main rebuilt in 2011 w/ Twin Disc 514 gear. John Deere 4045 65 Kw aux w/ electric clutch PTO and a Vickers 25 GPM pump. Updated keel coolers. 18 ton IMS RSW system chills 85k lbs of salmon in (2) recently reinsulated and relined fish holds. New stern fuel tanks, water tanks, mast and rigging. Marco 17" crab block, Marco seine block and false deck partition included. Full electronics package, plus video monitoring system. Call for a survey and a full list of upgrades. Reduced to $775,000.
$225,000
thumbnail CR16-025  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1964    Length: 58    Hull: Wood    Builder: Hansen    Location: Oregon
58'x16.5'x7.6' wood tender/crabber, built in 1964 by Hansen. 290 hp Detroit 8V71 main w/ appr 8,000 hrs on complete overhaul. New 25 kw Isuzu genset. 15 ton RSW system, packs 52,000 pounds in tanked fish hold. Hull recently recaulked. (2) picking booms w/ PL8 winches. 17" crab block. Electronics include (2) VHF, radar, color sounder, ComNav pilot, and more. Asking $225,000.
$1,075,000
thumbnail CR16-022  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1979    Length: 57.9    Hull: Steel    Builder: Union Bay Boat Works    Location: Washington
57.9'x27'x10' steel longliner that can easily be converted to seining, crabbing and pot cod. Originally built in 1979 and extensively rebuilt in 2007, including a bulbous bow and sponsons. Cummins KTA 19-M3 main rated at 640 hp. John Deere 50 kw and 27 kw generators. Teknotherm RSW. 95,000 lbs capacity in two fish holds. Full aluminum shelter deck, Marco autobaiter. Stainless hydraulic plumbing. Captains stateroom w/full head on bridge. Full shop and bait freezer in pilot house sponsons. Extensive electronics package including satellite compass, NavNet navigation system, Nobeltec navigation software, Furuno color video sounder and ECC Globe terrain building software. Top of the line vessel with numerous upgrades and recent shipyard work. Asking $1,075,000 for boat alone. WG pot, CG HAL, BS, and AI LLPs available at market value.
$260,000
thumbnail CR16-021  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1972    Length: 35    Hull: Fiberglass    Builder: Mel Martin    Location: Washington
35'x11.6' fiberglass crabber built by Mel Martin in 1972. Cat 3056D rated at 205 hp with ZF gear both new in 2009. (2) new aluminum fuel tanks with 270 gallons capacity. Fully rigged and ready to crab. Packs 10,000 lbs crab. Electronics include Robertson autopilot, radar, SSB, (2) GPS, and sounder. Remodeled galley with diesel stove, microwave, hot water, shower, head and (6) berths. Complete package including Puget Sound crab permit, 100 crab pots and portable generator. Price reduced to $260,000 for boat and permit.
$490,000
thumbnail CR16-018  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1995    Length: 51    Hull: Fiberglass    Builder: Skookum/First Cabin    Location: Alaska
51'x15' fiberglass combination longline/pot/seiner built by Skookum/First Cabin in 1995. John Deere 6068 at 330 hp. Twin Disc 3:1 ratio. John Deere 40 kw genset. 1,200 galllons fuel in 2 tank. Packs 55k lbs in (2) fish holds. Chills 40k lbs with 18 ton RSW system. Aft hold packs 15k lbs, or plate freezer option available. Full aluminum longline forward and aft shelter. Kohlstrand longline hauler, 15" Junes crab block and Junes davit and valves. Electronics include (2) radars, (2) VHF, (2) GPS, computer, (2) sounders, ComNav autopilot and hailer. Dickinson stove, hot water heater, shower, (4) berths and day bunk in wheel house. Asking $490,000.
$2,700,000
thumbnail CR16-011  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1978    Length: 160    Hull: Steel    Builder: Bender    Location: Washington
160'x35'x14.25' steel ex-crab catcher/processor, built in 1978 by Bender. Twin Lugger 6170 mains rated at 700 hp ea. (2) 300 kw GMC 8V92 gensets and (1) 650 kw Cummins KTA38GI gen set. 60' x 30' clear deck area. Quarters for 32 people. 81,500 gallons fuel, 24,500 water. Vessel has been used for research, crab, and longline. Recent 5 year ABS loadline renewal. Call for survey or additional info. Asking $2,700,000.
$310,000
thumbnail CR16-009  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1950    Length: 50    Hull: Steel    Builder: William P Johnson    Location: California
49'x14.3'x6.1' steel combination California crabber, dragger, troller built in 1950. Cummins 855 at 325 hp main. Twin Disc gear 509. Perkins 22 kw generator. 2,100 gallons fuel capacity in 5 tanks. IMS blast freezer. Deck equipment includes net, boom, net reel, winches, outriggers and 70 crab pots. Electronics include ComNav autopilot, Furuno GPS, Raytheon sounder, VHF and a Furuno 24 mile radar. CA 250 pot permit included. Asking $310,000.
$300,000
thumbnail featured listing CR16-008  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1970    Length: 39    Hull: Aluminum    Builder: Rohd    Location: California
39'x16' aluminum crabber built in 1970 by Rohd. Twin Detroit mains rated at 425 hp. Packs 6,000 lbs. Electronics include GPS, (2) VHF, Furono radar, sonar, sounder. New top house, crab tank, Glendinning engine controls, shaft and bearing. Includes a 250 pot California crab permit, crab block, davit, dump box and 183 (40") pots. Reduced to $300,000 for everything.
$125,000
thumbnail CR16-007  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1964    Length: 54    Hull: Wood    Builder: Sagstad    Location: Oregon
54'x16'x8' combination seine/troll/crab, built in 1964 by Sagstad Marine. Detroit 8V71 main. Twin Disc 509 gear with a top mount PTO. Isuzu 10 kw genset. Seine deck winch, power block, and bait chopper. Furuno GPS, Icom VHF, Icom SSB, Furuno radar and Furuno sounder. Asking $125,000.
$125,000
thumbnail CR16-002  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1975    Length: 44    Hull: Steel    Builder: Monk design    Location: California
44'x13'x6.2' Monk design steel CA salmon troll package. Cummins QSL9 rated at 285 installed new in 2009. Daewoo 24kw generator installed new 2009. Aluminum boom with vanging and 2 Pullmaster winches, pot hauler, boom mounted davit and Tulsa deck winch. Two large fish holds. All new bulwarks and trolling poles. Electronics includes ComNav autopilot, (3) Garmin GPS,Garmin radar, Simrad autopilot, Garmin and Furuno color sounders. Package includes CA salmon permit. Price reduced to $125,000.
$1,395,000
thumbnail CR15-037  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1991    Length: 58    Hull: Steel    Builder: John A Karuza    Location: Washington
58'x21'x10' ideal combination vessel rigged for seining, longlining and crabbing. Monk design built in 1991. John Deere 6135 450 hp main installed new 3 years ago. Twin Disc MG 516 gear w/ trolling valve, installed new 3 years ago. John Deere 65kw (new 3 years ago) and Isuzu 20kw generators. Bow thruster. Two hermitic Copland 12 ton and 15 ton RSW systems chills 90,000 pounds in 2 fish holds. 7,500+ gallons fuel capacity. Electronics include (2) Icom VHF, Furuno GPS, Furuno depth indicator, Standard Horizon Chart, Simrad autopilot, satellite compass, satellite phone, and (2) radar. Price reduced to $1,395,000.
$375,000
thumbnail CR15-015  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1990    Length: 42    Hull: Aluminum    Builder: Hydraulic Fishing Supply    Location: Alaska
42'x14.5'x4' combination seiner/gillnet vessel built in 1990 by Hydraulic Fishing Supply. Recently rebuilt twin Cat 3208 mains rated at 850 total horsepower. Recently rebuilt Twin Disc gears and new shafts. New 30kw Kubota generator and 12 ton RSW system. New hydraulic system including (2) 8.6 Eaton compensating pumps. Maritime Fab power roller and auto levelwind. Electronics include (3) VHF, ComNav autopilot, Furuno radar, Furuno color sounder, laptop and Furuno GPS. lots of recent work. Also available is a seine permit. Can be available with the seine package. Gillnet ready, asking $375,000.
$890,000
thumbnail CR15-030  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2010    Length: 58    Hull: Steel    Builder: Kodiak Marine Construction    Location: Washington
58'x24'x8' combination seiner/crabber/tender built in 2010 by Kodiak Marine Construction. Twin John Deere mains rated at 325 hp each. ZF gears. Wesmar 12" bow thruster. IMS 18 ton RSW system chills 150,000 lbs. Additional 12 ton RSW deck unit for tendering included. 2,400 gallons fuel capacity. Marco power block w/ gripper and deck winch w/ pursing shives. Free standing mast, (2) port and starboard mounted cranes, main boom. Electronics include Furuno multifunction unit, (radar, GPS,depth sounder, plotter), ASU laptop with Captains software, Wesmar HD825 sonar, Furuno color sounder, (2) VHF, Satellite phone and ComNav autopilot. Asking $890,000.
$45,000
thumbnail CR15-028  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1986    Length: 32    Hull: Fiberglass    Builder: Modutech    Location: Washington
32'x12'x2.5' fiberglass crab/sternpicker built by Modutech in 1986. Cat 3208 main rated at 265 hp. 506 Twin Disc gear. New gel coat and deck. New dripless shaft and 4 blade Nibral prop. 13 knots WOT. 400 gallons fuel capacity in (2) tanks. Packs 5,000 lbs in fish box w/ live-well. Rebuilt 17" Junes crab block and davit. Aluminum drum w/ new motor. Kinematics anchor winch. LED Lighting, LED Lighting. Electronics include VHF, Furuno sounder, Garmin plotter, GPS and a 200 watt inverter. Asking $45,000.
$450,000
thumbnail CR15-024  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1969    Length: 56.6    Hull: Steel    Builder: Lackey    Location: Oregon
56.6'x16.5'x9.1' steel combination vessel built by Paul Lacky in 1969. Twin Cummins 8.3 liter 300hp mains. rebuilt in 2014. Twin Disc 509 3:1 gears. John Deere 4 cylinder 65kw aux. Deck equipment includes 3-spool gurdies, tuna pullers, long line hauler, and 19" Junes crab block. Electronics include VHF, SSB, CB, sounder, computer/plotter, radar, and auto pilot. Permits include Oregon 300 pot crab and Oregon salmon troll. Asking $450,000.
$30,000
thumbnail CR15-019  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1987    Length: 26    Hull: Fiberglass    Builder: home built    Location: Washington
26'x9'x2.5' fiberglass combination skiff built in 1987. 270 Crusader gas main with a new propellor. 350 Mercrusier spare main. 100 gallon aluminum fuel tank. 15 knot cruise. Fuel tanks, Aft deck, and gunnels new in 2009. Aluminum crab davit, 12" block and spare propellor. V berth provides storage. Electronics include Raytheon sounder, plotter and radar all in one. 8'x11.6" of open deck. Galvanized tandem axle trailer with surge brakes and new tires. Asking $30,000.
$390,000
thumbnail CR15-017  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1979    Length: 41.5    Hull: Fiberglass    Builder: Modutech    Location: Oregon
41.5'x11.5'x5' fiberglass crabber/troller, built in 1979 by Modutech. Partially enclosed tophouse. GMC 6V92 rated at 300 hp, 7.5 kw Whisper Watt gen set. Bait chopper, 17" crab block on davit, and 3 spool Simplex gurdies. Electronics include (2) GPS, (2) VHF, radar, (2) sounders, plotter, and ComNav autopilot. 4-man liferaft. Comes WITH 250 pot CA crab, 300 pot OR crab, and OR salmon troll licenses. Price reduced to $390,000. 300 pots available for sale to buyer of vessel.
$80,000
thumbnail CR15-005  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Length: 35    Hull: Fiberglass    Builder: unknown    Location: British Columbia
35'x12'x4' fiberglass crabber/prawn vessel. Volvo 71 main rated at 400 hp with only 200 hours. 16 know cruise. 14” hydro slave hauler, davit and sorting table. Electronics include GP-32 GPS, Standard Horizon VHF, Tough Book computer, Furuno radar, Furuno sounder, Nobeltech plotter and Xantrex 2000 watt inverter. Asking $80,000.
$97,000
thumbnail CR15-004  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1991    Length: 30    Hull: Aluminum    Builder: AK Workboats    Location: British Columbia
30'x10' aluminum Puget Sound crabber built by AK Workboats in 1991. Yanmar 6LYA rated at 315 hp. Arneson ASD8 surface drive. 20 knot plus cruise. Bow thruster. Crab davit, 12' Hydroslave crab block, landing table, Diamond Sea Glaze windows, Webasto forced air heater and 6 man life raft. Electronics include a Furuno FCV-620 sounder, Furuno 16 mile radar, Standard HZ GPS, Standard VHF and an inverter. Price reduced to $97,000.
$85,000
thumbnail CR14-016  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1976    Length: 38    Hull: Fiberglass    Builder: Modutech    Location: California
38'x12'6" fiberglass Modutech troller/crabber, built in 1976. Cummins 285 hp 9 liter diesel, new in 2011, appr. 1,500 hrs., burn 3 gph@8 kts. ZF gear new in 2011. Both installed in 2013. Electronics inclde GPS, VHF, polotter, sounder, autopilot, computer, and more. Comes with trolling poles, gurdies, and crab davit. Packs 4,000# crab. Includes California salmon troll license. Asking $85,000.
$129,500
thumbnail CR14-009  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2004    Length: 32    Hull: Aluminum    Builder: Western Fabrication    Location: Washington
32'x10'x3' combination crab/longline/tuna vessel built in 2004 by Western Fabrication. Volvo Penta D4 main rated at 225 hp with only 326 hours. Dual prop outdrive. Honda 9.9 trolling motor. 120 gallon fuel capacity. Tuna poles, longline chute, crab block, davit and landing box. Electronics include an Icom VHF, Lowrance sounder, Garmin plotter, VMS. Easy loader trailer. Price reduced to $129,500.
Web Design, 3 Crown Creative