Combination Vessels[56 listings]

Click here to be notified of updates to the Combination Vessels pagewatch helphelp
« first ‹ previous next › last »
Vessels 1 - 50 of 56
$375,000
thumbnail CO19-018  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1979    Length: 40    Hull: Fiberglass    Builder: Beck    Location: Alaska
40'x14' fiberglass seiner built by Beck in 1979. GMC 692 main engine rated at 260 hp. Twin Disc MG-507 gear with 2:1 ratio. Makes 10 knots. Packs 23,000#. IMS 7.5 ton RSW unit, completely overhauled in 2018. Deck equipment includes Kolstrand seine winch and Kinematics seine block. Electronics include (4) VHF, Furuno radar, plotter, and Wagner autopilot. Chignik seine permit available. Call for survey. Asking $375,000.
$45,000
thumbnail CO19-017  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1979    Length: 35    Hull: Fiberglass    Builder: Permaglass    Location: Alaska
35'5"x12' fiberglass troller/longliner built by Permaglass in 1979. Volvo MD70B rated at 120 hp w/ approx 1000 hrs on the rebuild. Twin Disc 506 gear w/ 2.91:1 ratio. Packs 10k lbs in (1) fish hold, w/ (6) compartments. Warren Junes 15" SS hauler, aluminum boom and poles. Greshen 15 gpm hydraulic pump. 600 gallons fuel capacity in (4) tanks. Electronics include GPS, (2) VHF, radar, SSB, radar, autopilot and inverter. Head, shower, Dickerson stove and fore peak heater. Includes (6) 300 ftm tubs of LL gear, snaps, hooks, bags, buoy line and anchors. Asking $45,000.
$295,000
thumbnail CO19-016  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2003    Length: 46    Hull: Fiberglass    Builder: Glass Works    Location: Hawaii
46'x14'x4' fiberglass tuna vessel built in 2003 by Glass Works. Cat C12 main engine rated at 700 hp, low hours. ZF gear with 2.2:1 ratio. 20 kVA Northern Lights gen set. Packs 6,500# in insulated fish holds. Accommodations for (3) with air conditioning. Equipment includes aluminum jig poles, longline gear and hauler, and (2) hydraulic Bandit reels. Electronics include (2) VHF, (2) GPS, (2) radars, Furuno sounder and plotter, and Simrad autopilot with (2) stations. Asking $295,000.
$2,000,000
thumbnail CO18-029  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1980    Length: 72    Hull: Steel    Builder: Duke's Welding    Location: Oregon
72'x22'x10' steel combination vessel. Monk-design, built by Duke's Welding in 1980. Currently set up as a crabber/shrimper. Cummins QSK19M main engine rated at 750 hp, installed new in 2015. Twin Disc MCX gear with 5:1 ratio. 100 kW and 50 kW Cummins, 36 kW Isuzu gen sets. Packs 70,000# in (2) holds. Deck equipment includes shrimp-style picking boom, (2) Tulsa 8,000#, outrigger winches, crab block with davit, coiler, and bait chopper. Electronics include (2) VHF, (2) sat phones, (3) sounders, (2) radars, (2) GPS, video camera system for back deck, Simrad autopilot, and (3) station Glendinning electronic engine controls. Very well-maintained vessel. Easily convertable to trawl or tender vessel. OR 500 pot and ocean shrimp permits available. Asking $2,000,000.
$625,000
thumbnail CO19-015  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1980    Length: 67    Hull: Steel    Builder: Metalcraft Marine    Location: Oregon
67'x22'x10' steel combination vessel rigged for trawl, built by Metalcraft Marine Corp in 1980. CAT 3408T main w/ Twin Disc 514 gear. 83 kW John Deere and 20 kW Cummins gensets. Approx 7,500 gallons fuel capacity in (8) tanks. Fish hold packs 80,000# of iced groundfish. Deck equipment includes net reel with full gantry, trawl winches w/ levelwinds, deck winch, net doors, crab block, bait chopper, and shelter deck. Electronics include (2) VHF, SSB, (2) radar, (2) sounders, (2) GPS, (2) computers w/ Coastal Explorer, and VMS system. Trawl permit and 500 pot WA crab permit available. Call for survey. Asking $625,000.
$200,000
thumbnail CO19-014  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1940    Length: 42    Hull: Wood    Location: California
42'x12.4'x6' wood combination crabber/troller built in 1940. Cummins 220 w/ Twin Disc 509. Aluminum crab tank insert holds 9k lbs and fiberglass insulated salmon insert holds 4k lbs. Includes salmon and tuna gear, aluminum trolling poles, crab gear, 320 pots, lines and buoys. (2) fuel tanks hold 500 gallons total. Electronics include GPS, VHF, SSB, radar, plotter and autopilot. Includes CA300 pot permit and CA salmon troll permit. Asking $200,000.
$1,900,000
thumbnail CO19-013  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1979    Length: 55    Hull: Steel    Builder: Giddings/Warren    Location: Oregon
55'x16.6'x6.2' steel combination vessel package, including permits for OR shrimp, OR salmon, 500 pot OR crab (65’), and West Coast trawl quota with vessel permit (60’). Built by Giddings in 1976. Cummins NTA-855M main w/ Twin Disc 514 gear. 30kW Isuzu genset, new in 2015. (3) hydraulic pumps. Packs 40,000# in insulated fish hold. Spray brine RSW system w/ Carrier compressor. Electronics include (2) GPS, (2) VHF, SSB, radar, sounder, Sitex plotter, computer w/ navigation system, and ComNav autopilot. Completely turn-key package with too much to list. Call for more info and details of trawl quota. Asking $1,900,000.
$155,000
thumbnail CO19-012  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1974    Length: 43    Hull: Fiberglass    Builder: Delta    Location: Alaska
43’x13’x3’ fiberglass combination vessel built by Delta/LeClerq in 1974. Volvo Penta TMD 70D main engine rated at 220 hp. Twin Disc 506 gear with 2:1 ratio. Packs 28,000# in (3) holds. 15 ton Highland RSW system. 21 kW Mitsubishi genset. (4) stations hynautics. Heavy rigging with ram slider. Deck machinery includes jig machine, Marco hauler, crab davit, pursing davit, Kolstrand seine block, and 16’ power skiff. Electronics include (2) VHF, Furuno GPS, radar and sounder, (2) plotters, and autopilot. Call for survey. Make offers. Asking $155,000.
$1,050,000
thumbnail CO19-011  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1969    Length: 104    Hull: Steel    Builder: Marco    Location: Washington
104'x25'x12' steel crabber/tender built by Marco in 1969. Cat D348 main engine rated at 750 hp, Cat gear. (2) Cat 155 kW gen sets. Packs 270,000# salmon in (2) holds. IMS 50 ton RSW system, overhauled 2018. Deck equipment includes an Aurora knuckle crane, pot launcher, and Marco power block. Tender package available. Full electronics package. Very nice boat, well-maintained, ready to fish or tender. Asking $1,050,000.
$650,000
thumbnail CO19-010  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1969    Length: 54    Hull: Steel    Builder: Paul Lackey    Location: Oregon
54'x17' steel combination crab/troll/longliner built by Paul Lackey in 1969. Cummins 855 rated at 300 hp w/ Twin Disc MG509. Isuzu 6BG1T 55 kW genset, new in 2015. Aluminum trolling poles and shelter deck. 19" crab block w/ davit, hydraulic ram, and bait chopper. Insulated fish hold packs 40k lbs halibut on ice and 10k lbs crab w/ insert. (2) Carrier compressors and (2) condensers. (1) 60 GPM hydraulic pump off main w/ electric clutch. (7) fuel tanks w/ approx 3,900 gallons fuel and 350 gallons fresh water. Includes OR 500 pot crab permit, good to 64' max LOA, and all longline, troll and crab gear. WA 500 pot crab permit available. Recent damage to house and rigging. Call for details and a survey. Asking $650,000.
$75,000
thumbnail CO19-009  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1975    Length: 35    Hull: Aluminum    Builder: Alumacraft    Location: Alaska
35'x10.5'x3' aluminum combination vessel built by Alumacraft in 1975. GMC 653 main rated at 160 hp. Twin Disc 506 gear with 2.5:1 ratio. Packs 11,000# in insulated fish holds. Deck equipment includes crab hauler, crab block, line hauler, and gillnet drum with drum driver. Electronics include a Garmin GPS, VHF, computer, (2) sounders, and an inverter. Can deliver the vessel from Canada. Asking $75,000 Canadian.
$950,000
thumbnail CO19-008  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1978    Length: 52    Hull: Steel    Builder: Troyer, JandH Boatworks    Location: Oregon
52'x22'x8' steel combination vessel built by Troyer in 1978, major overhaul by J and H Boatworks in 2011. John Deere 6090AFM75 main engine rated at 425 hp. Twin Disc MG509 gear with 2.98:1 ratio. John Deere 65 kW and Isuzu 15 kW gen sets. Packs 60,000# salmon, #30,000 crab in (1) insulated holds. IMS 20 ton RSW system. Equipment includes a pedestal crane, crab block, longline hauler, tuna poles/pullers, and (800) Trilogy pots. VHF, sounder, sonar, radar, GPS, (2) autopilot, VMS, sat phone, and computer. OR and WA 500 pot permits also available. Vessel is ideally-suited for crabbing, longlining, trolling, and tendering. Call for survey. Asking $950,000 for boat only, $1,700,000 for boat and permits.
$2,888,888
thumbnail CO19-005  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1991    Length: 113    Hull: Steel    Builder: Giddings Boat Works    Location: Alaska
113'x28'x7' steel combination Bering Sea crabber/tender built by Giddings Boat Works in 1991. Twin Cummins QSK-19 each rated at 600 hp and Twin Disc MG516 reduction gears. Iveco w/ 35 kW and (2) Cummins 6CTA w/ 125 kW gensets. (3) refurbished fish holds pack 365k lbs of salmon and 175k lbs crab. 40 ton Thermal Tec RSW w/ recent upgrades. (10) fuel tanks w/ approx 20k gallons fuel capacity. Slattery 5-ton and 2-ton articulating deck cranes. Complete deck setup for crab and tendering. Full electronics package. Updated galley, (10) berths and (4) staterooms. Many recent upgrades. Call for a survey. Asking $2,888,888.00
$220,000
thumbnail CO19-006  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1979    Length: 38    Hull: Fiberglass    Builder: Ledford    Location: Alaska
38'x13' fiberglass combination vessel built in 1979 by Ledford. Currently rigged as a seiner, longliner, and pot vessel. John Deere 6068 main engine rated at 175 hp. Twin Disc 506 gear with 1.97:1 ratio. Packs 25,000# in insulated fishhold. IMS 7.5 ton RSW System. Heavy duty aluminum mast and booms, 26" Kinematics block, Kolstrand deck winch and removable seine davit. Electronics include (2) VHF, Furuno GPS, Furuno radar, Furuno sounder, plotter, sonar, and ComNav autopilot. Includes 23' jet-powered skiff. Call for survey. Asking $220,000.
$495,000
thumbnail CO19-004  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1987    Length: 90    Hull: Steel    Builder: Rodreigez    Location: Oregon
90'x24'x11.9' steel tuna troller, built in 1987 by Rodreiguez of Coden, AL. Cummins 855 main rated at 450 hp, rebuilt in 2015. Twin Disc 520. (2) 30 kW Cummins 4B-3.9 gensets. Insulated fish hold packs approx. 100,000# tuna. Dual blast freeze system, w/ (8) fans mounted in fish hold. Complete deck setup, including (2) sets of trolling poles, tuna pullers, and bait tank. Electronics include (2) GPS, (2) VHF, SSB radio, (3) computers w/ navigational software, radar, sounder, Furuno CH250 sonar, and (2) autopilot systems. Turn-key operation with lots of recent upgrades. Call for survey. Asking $495,000.
$269,000
thumbnail CO19-002  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1976    Length: 60    Hull: Steel    Location: California
60'x22'x6' steel vessel rigged for trawling. Built in 1976. Detroit V871 main engine rated at 300 hp. Twin Disc 514 gear with 4.5:1 ratio. 65 kW Perkins and 20 kW Isuzu gensets. Packs 50,000# tuna, frozen. Blast freeze system. Large drum with levelwind. Accommodations include head, shower, and berths for (5). Electronics include (2) VHF, (2) GPS, (2) Furuno radars, sounder, plotter, sonar, computer, and autopilot. Asking $269,000.
$495,000
thumbnail CO19-001  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1975    Length: 69    Hull: Steel    Builder: Gary Breitenbach    Location: Oregon
69'x16'x9' steel project vessel undergoing transformation from house-forward to house-aft. Built in 1976 by Gary Breitenbach in Half Moon Bay, CA. Cumins NT-855 main rated at 325 hp. Twin Disc 514 gear. 20 kW and 65 kW Isuzu gensets. Packs 40,000# crab in tanked, insulated hold. INCLUDES 500 pot OR crab permit good to 72'. Permit must transfer with vessel. Call for more information and survey. Asking $495,000.
$35,000
thumbnail CO18-034  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1980    Length: 30    Hull: Fiberglass    Builder: Wilson Boats    Location: California
30'x10.5'x4' fiberglass combination vessel built by Wilson in 1980, and rigged for multiple fisheries. Cummins rated at 210 hp w/ 3,700 hours. Borg Warner T3 gear. Cruises at 18 knots burning 5 gph, top speed of 22 knots. Packs 5,000 lbs in fiberglass hold. 12" Junes crab block, and 300 gallon live well. Includes galvanized 3 axle trailer. Electronics include GPS, VHF, radar sounder, plotter, and auto pilot. Reduced to $35,000.
$40,000
thumbnail CO18-041  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1981    Length: 32    Hull: Fiberglass    Builder: Modutech    Location: Alaska
32'x14'x6' twin-screw fiberglass combination vessel built in 1981 by Modutech. (2) Cat 3208 main engines rated at 260 hp each. Twin Disc marine gears. Packs approximately 4,500# crab, 10,000# halibut in (4) holds. Deck equipment includes a crab block, longline hauler, and hydraulic davit. Electronics include (3) VHF, GPS, Furuno sounder, plotter, and uninstalled Comnav autopilot. New micrcommanders and spare controls and jog sticks. Call for survey. Asking $40,000.
$235,000
thumbnail CO18-040  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1991    Length: 40    Hull: Fiberglass    Builder: Lindell    Location: Washington
40'x13'x6' fiberglass combination crabber/troll/gillnetter built by Lindell in 1991. Lugger 6108 rated at 330 hp w/ Twin Disc 507 gear. Isuzu 3 cylinder aux w/ 10kW genset. (5) insulated fish holds back 10k lbs salmon or 5k lbs crab. Enclosed fly bridge and aluminum bait shed. Crab block, dump box, Hasbra gurdies, trolling poles, gillnet reel, and power roller. 600 gallons combined fuel capacity in (2) tanks. Electronics include SSB, radar, (3) GPS, VHF, plotter, autopilot and many more. Dickenson stove, shower, head, (4) berths, focsle heater and chest freezer. Call for a survey. Asking $235,000.
$600,000
thumbnail CO18-039  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1970    Length: 73    Hull: Steel    Builder: Bender    Location: Alaska
73'x22'x10' tender vessel built in 1970 by Bender Shipyard. Major overhaul in 2016. GMC 12V-71 main rated at 365 hp. 100 kW John Deere and 30 kW GMC 371 gensets. 30 ton IMS RSW installed 2016. Packs 150,000k# salmon in (2) insulated holds. 8,000 gallons fuel capacity. (2) Tadano deck cranes. Electronics include (3) VHF, Furuno radar, Furuno GPS, (2) Furuno sounders, Furuno autopilot, HP desktop computer with flat screen monitor. Excellent tender platform. Asking $600,000.
$600,000
thumbnail CO18-037  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1978    Length: 57    Hull: Steel    Builder: Lasqueti Boat Company    Location: Alaska
57.9'x22'x7.5' steel combination longline/tender/pot vessel built in B.C in 1978 and sponsoned in 2008 by Arrow Marine. Cummins 855 rated at 410 hp w/ rebuilt Twin Disc 514 gear. Isuzu 22kW getset. New John Deere 4045 powers a 6 and 4 cube hydraulic pumps. 30 ton Carrier compressor w/ SS chiller, new condenser pump. (2) holds pack 90k lbs salmon. New 2k lbs Olympic knuckle crane and intermediate shaft. Reworked hydraulics w/ many new components. Aluminum shelter, Hanson pot launcher, Marco coiler, Yaquina puller w/ SS shivs, main boom and (2) picking booms. Complete electronics package that includes camera monitoring system. (6) berths. Call for a list of upgrades and a survey. Asking $600,000.
$2,700,000
thumbnail CO18-038  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2000    Length: 58    Hull: Steel    Builder: Fred Wahl Marine    Location: California
58'x28.5'x13' combination vessel built in 2000 by Fred Wahl Marine. Cat 3412 main rated at 615 hp. Reintjes gear w/ 6:1 ratio. 190 kW Cat 3306, 105 kW Cat 3304, and 55 kW Cat 3304. Bulbous bow and 16" bow thruster. Packs 300,000# in (2) holds. 50 ton RSW system w/ titanium chiller. Main boom and telescoping picking boom, built by Snow. Kolstrand deck winch and 2-speed 33" Marco power block. Excellent electronics, including Simrad autopilot and Koden Sonar. Fully equipped with squid lights. Snow skiff, seine net, pump, and dewatering box available. Turn-key vessel with lots of recent upgrades. Call for survey and more info. Asking $2,700,000.
$1,250,000
thumbnail CO16-023  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1980    Length: 58    Hull: Fiberglass    Builder: Skandia Boat    Location: Washington
58'x18.5' fiberglass combination seine/crab/longliner built by Skandia in 1980. Efficient Isuzu main at 505 hp uses 7 gph. Twin Disc triple pump PTO and MG 514 gear. Isuzu 40 kw and John Deere 30 kw aux. Keypower 14" bow thruster. Chills 120k lbs salmon and 65 tons squid w/ twin 18 ton IMS chillers. Fish holds reconstructed at Delta Shipyard with 1" resin infused panels and additional deck reinforcement. Marco power block, Pilkington deck winch, crab davit, block, bait chopper, and complete longline deck set up. Tufflex watertight deck coating. Redundant state of the art electronics and spacious galley with washer/dryer. Call for a survey and complete list of deck gear. Asking $1,250,000.
$1,400,000
thumbnail CO18-036  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1980    Length: 98    Hull: Steel    Builder: Bender    Location: Alaska
98'x24'x10' steel crabber/combination vessel built by Bender in 1980. Cat 3412 main engine rated at 624 hp, with minimal hours since re-build. Twin DIsc 520 gear with 6.11:1 ratio. (2) John Deere 6081, 175 kW gensets, and (1) Isuzu genset. Packs 200K# in (2) tanks with 40 ton RSW system. Deck equipment includes Marco King Hauler, Greensen deck crane estimated at 2,000#, and bait chopper. Electronics include (3) VHF, (2) radar, sounder, autopilot, GPS, and Nobel Tec navigation system. Call for survey. Asking $1,400,000.
$2,600,000
thumbnail CO18-033  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1969    Length: 100    Hull: Steel    Builder: Pacific Fishermen Shipyard    Location: Washington
100'x36'x12.5' steel crabber built by Pacific Fishermen Shipyard in 1969. Cat D348 main engine rated at 750 hp. Twin Disc MG527 gear with ratio of 5.17:1. (2) Cat 3306B 165 kW and (1) Deere 4039D 40 kW gen sets. Packs 200,000# crab, 400,000# salmon. 40 ton RSW system built by Highland, new compressors, motors, condensers in 2017. 12 ton Slattery deck crane. Full tender package and hydraulic sorting table included. Electronics include (3) VHF, (2) Furuno radars, (2) Furuno GPS, and Robertson autopilot. Call for survey. Asking $2,600,000.
$180,000
thumbnail CO18-032  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1985    Length: 43    Hull: Aluminum    Builder: US Navy    Location: Washington
43'x13'x6' aluminum crabber/troller. Originally built as a US Navy aircraft personnel rescue boat, refitted as a commercial vessel. Twin GMC 871 main engines rated at 350 hp each, with Twin Disc 514 gears, 2:1 ratio. Cruises at 13 knots. 20 kW Northern Lights gen set. Packs 7,500# crab in insert. Crab block with davit. Electronics include VHF, (2) radars, (2) sounders, plotter, and ComNav autopilot. Includes OR 200 pot crab permit. Call for survey. Asking $180,000 for the package.
$580,000
thumbnail featured listing CO18-031  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1996    Length: 46    Hull: Steel    Builder: Meyer/Faulk    Location: Oregon
46'8"x14'x6' steel combination tuna/salmon/crabber built in Nanaimo, B.C. in 1996. Volvo TMD 120A. Twin Disc 514 gear w/ 3.5:1 ratio. Kubota 20kW genset. 10 ton plate freezer. Fiberglass fish hold packs 10 ton albacore, salmon in slush and 10k lbs of crab w/ insert. Aluminum house, rigging and hay rack. East Hope gurdies, 17" Warren Junes block and tuna pullers. Electronics include (3) GPS, radar, Sat phone, VHF, sounder, computer, camera monitoring and autopilot. Comfortable galley, (5) berths, and head. Includes OR 300 pot permit, 300 38" pots, gear, OR and CA troll permits. Call for a survey. Reduced to $580,000 for complete package.
$250,000
thumbnail CO18-030  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1971    Length: 50    Hull: Steel    Builder: Yaquina Boat Works    Location: Oregon
50'x14'x7' steel troller/crabber built by Yaquina Boat Works in 1971. Remanufactured Cat 3208 main rated at 210 hp w/ new Twin Disc 506 gear installed in 2016. 25 kW Isuzu gen set. Packs 9,000# crab in insert. All wiring overhauled in 2013. Deck equipment includes 3-spool trolling gurdies, hydraulic tuna pullers, crab block with davit, and bait chopper. Electronics include (4) VHF, (2) Furuno GPS, radar, (2) sounders, and ComNav autopilot. Includes OR Ocean Troll permit, crab deck equipment, and 300 pots. Call for survey. Asking $250,000 for vessel.
$198,000
thumbnail CO18-026  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1951    Length: 48.5    Hull: Wood    Builder: Hansen    Location: Washington
48.5'x13.5' wood combination troller/longliner built by Hanson in 1951. John Deere 6090 AFM75 rated at 285 hp w/ Twin Disc 509 gear. Kobota 12.5 kw gen set. Insulated fish hold packs 25k lbs. Aluminum shelter. Longline drum, 3 spool salmon gurdies and a 14" line hauler. (2) fuel tanks hold 500 gallons combined. Electronics include GPS, radar, sounder, VHF, inverter and autopilot. (3) berths, stove, fridge and head. Asking $198,000.
$425,000
thumbnail CO18-027  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1998    Length: 92    Hull: Steel    Builder: Unknown    Location: Washington
92'x24'x12' gulf-shrimper style steel vessel built in 1998 in Bayou La Batre, LA, currently rigged for hagfish. Cat 3412 main engine rated at 650 hp. Twin Disc reduction gear. 30,000 gallons fuel capacity. 100 kW Cat, 75 kW Isuzu, and 45kW Mitsubishi gen sets. Large plate freezer on and below deck. Electronics include (3) VHF, Furuno radar, Furuno sounder, GPS, and ComNav autopilot. Asking $425,000
$150,000
thumbnail CO18-024  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1978    Length: 54    Hull: Steel    Builder: Frank Rogganbuck    Location: Oregon
54'x16'x7' steel troller/gillnetter built in 1978 by Frank Rogganbuck. Cummins 855 main engine rated at 200 hp. Cruises at 6.5 knots. 25 kW Isuzu gen set and 25 kW cruise generator. Equipped with spray brine system. Packs 22 tons of tuna. Deck equipment includes a gillnet reel with Hydrostat motor. Electronics include VHF, (3) GPS, (3) radars, Furuno sounder, Garmin plotter, and ComNav autopilot. Reduced to $150,000.
$595,000
thumbnail CO18-023  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1981    Length: 52    Hull: Steel    Builder: Jack St. Clair    Location: Oregon
52'x20'x7' steel crabber/longliner/tender built by Jack St. Clair in 1981, and sponsoned in 2008 at Giddings. Cummins 855 main rated at 300 hp. Twin Disc 509 gear w/ PTO and 30 gpm hydraulic pump. 25kW and 30kW Northern Lights gensets. 18 ton IMS RSW system. All new stainless exhaust. Packs 28k lbs. crab and 60k lbs salmon in tanked fish hold. Electronics include (2) GPS, (3) VHF, plotter, sounder, computer, sat phone, and ComNav autopilot. Includes new aluminum house. Solid platform for any West Coast fishery. Call for survey and more info. Asking $595,000.
$350,000
thumbnail CO17-025  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1994    Length: 62    Hull: Aluminum    Builder: Hoy's Marine    Location: Washington
62'x23'x8' aluminum combination vessel, has been used for trawl, crab, and tendering. Triple screw w/Cat 3176 mains rated at 600 hp ea, Twin Disc 5112V 1.8:1 gears. (2) 52 kW John Deere gen sets. Two floodable holds, packs appr 80,000# with 20 ton RSW system. Aluminum trawl gantry. Electronics include ComNav autopilot, (2) Furuno radars, (2) GPS, (2) color sounders, SSB, (2) VHF, and more. Nice interior finish. Asking $350,000.
$850,000
thumbnail CO18-021  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1983    Length: 58    Hull: Fiberglass    Builder: Monk design    Location: Washington
58'x20'x10', Monk-designed, fiberglass longliner, built in 1983. Detroit Diesel MTU main rated at 375 hp, with approximately 8,500 hrs since new. Twin Disc 514 gear with 5:1 ratio. 40 kW John Deere and 29 kW Yanmar gen sets. Packs 95,000#. 10 ton chiller/blast freezer. Includes longline gear, troll gear, bait shed, and main boom. Full electronics package including (2) VHF, (2) plotters, (2) sounders, Furuno radar and sounder, and ComNav autopilot. Very clean boat. Reduced to $850,000.
$650,000
thumbnail CO18-020  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1982    Length: 48    Hull: Steel    Builder: Martin Allen Design    Location: California
48'x20'x6.6' steel crabber, Martin Allen design built in 1982 and sponsoned in 2015. Detroit 8v71 rated at 300 hp, rebuilt in 2015. Twin Disc MG 5111. Cummins 40kW genset w/ approx. 2,800 hrs. Packs 22k# crab. 20 ton IMS blast freeze RSW unit. Electronics include GPS, VHF, (2) sounders, Garmin plotter, ComNav 1001 autopilot, and VMS unit. SS davit, Junes block, Kolstrand gurdies, and rigged for bait fishing tuna. Includes replacement house, freestanding mast, and complete shipyard plans. CA 400 pot crab permit INCLUDED, good to 53' max. Call for survey and more information. Price reduced to $650,000 for the package.
$475,000
thumbnail CO18-018  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1999    Length: 48    Hull: Fiberglass    Builder: Rawson/Little Hoquiam    Location: Alaska
48'x15'x8.5' fiberglass combination vessel. Rawson hull, completed in 1999 by Little Hoquiam Boatworks. Twin John Deere 6076 mains rated at 250 hp each. Twin Disc 5061 gear with 2:1 ratio. Cruises at 10 knots. 25 kW Yanmar generator. Packs 40k lbs of salmon. 15 ton IMS RSW system. Longline reel, bait table, Simplex gurdies, trolling poles, fiberglass shelter w/ canvas cover. Deck crane and rolling chalks. VHF, Furuno autopilot, GPS, Foruno radars (2), color video sounder, and Nobeltech navigation system. Call for survey. Asking $475,000.
$85,000
thumbnail CO18-017  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1969    Length: 38    Hull: Fiberglass    Builder: Unknown    Location: Alaska
38'x12.5' sternpicker, fiberglass over wood, built 1969. Rigged for gillnet and shrimp pot fishing. 250 hp Cummins 6BTA, appr. 15,000 hrs. Northern Lights gen set. 7.5 ton IMS hydraulic RSW system. Gillnet drum w/ Twister drive, leadline slinger. Electronics include GPS/plotter, radar, and sounder (all Sitex) VHF, and inverter. Asking $85,000 for boat alone. Shrimp package w/ vessel, all gear, removable electric blast freeze system, and SE shrimp pot permit for $139,000.
$439,500
thumbnail CO18-014  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2015    Length: 40    Hull: Fiberglass    Builder: Wegley    Location: Washington
41.5’x13’x4’ fiberglass combination vessel, rigged for crab and gillnet. Hull built by Wegley, completed in 2016. CAT C-9 main rated at 503 hp, w/ appx. 1,000 hours. ZF 360A reduction gear. Westerbeke 5.5 kW gen set. 640 gallon fuel capacity. 16 knot cruising speed and 24 knot max. Packs 25,000 #s in one fish hold. Aluminum mast and boom. Electronics include GPS, VHF, Furuno radar, sounder and plotter, ComNav autopilot, and Xantrex inverter. Very clean boat and turn-key operation. Call for survey and more information. Asking $439,500.
$300,000
thumbnail CO18-013  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1977    Length: 38    Hull: Fiberglass    Builder: Delta/LeClerq    Location: California
38'x12.6'x3.2' combination vessel built by Delta Marine/LeClerq in 1977. Volvo TMD70-B main. Twin Disc MG-506 gear. Twin Disc SM-11 power take off. All new hydraulics, SS lines, plumbing and pumps. Aluminum rigging w/ topping, vanging, and cargo winches. Crab tank insert packs 3k lbs. New 17" Junes crab block. Trolling gurdies w/ new motors. Packs 20k lbs in tankable fish hold. 700 gallons fuel capacity in two tanks. New steering helm pumps. Electronics include VHF, new ComNav autopilot, Furuno Navnet II system including GPS, radar, sounder, and plotter. Includes CA250 crab permit good to 47' LOA. Complete package for $300,000.
$235,000
thumbnail CO18-009  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1989    Length: 46    Hull: Aluminum    Location: Washington
46'x15'x5.9' aluminum combination vessel, built by Bill Redding in 1989. Tier 2 John Deere 6068T main, rated at 250 hp, and ZF reduction gear. Isuzu C240 w/ 20 kW Lima Mac generator. 800 gallon fuel capacity in (2) tanks. Setup to blast freeze with Carrier 056 compressor, new 10 hp motor. Fish hold packs 6.5 tons of frozen albacore. (2) 3-spool Easthope gurdies, Hydroslave line hauler, and salmon/troll gear. Electronics include GPS, VHF, SSB, radar, Furuno sounder, ComNav 2001 autopilot, and Global Star satellite phone. CA salmon permit included, and OR salmon permit available. Versatile boat with great history. Call for survey and more info. Reduced to $235,000.
$850,000
thumbnail CO18-005  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1979    Length: 50    Hull: Steel    Builder: Monk Design    Location: California
50'x15'x8.5' steel combination vessel, rigged for crab and tuna. Monk design, built by W. Robertson in 1979. Cummins main rated at 325 hp. Kubota 30 kW auxiliary. 1,800 gallon fuel capacity in (4) tanks. 10 ton Spray Brine system w/ 5F30 Carrier compressor. Capacity of 26,000# crab in tanked hold. Electronics include GPS, (2) VHF, SSB, radar, sounder, computer, and ComNav 1001 autopilot. Includes deck equipment and gear for salmon and tuna. 500 fully rigged crab pots. CA 500 pot crab permit good to 50', CA and OR salmon troll permits. Complete turnkey package with permits and gear. Call for survey. Asking $850,000.
$135,000
thumbnail CO18-004  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1970    Length: 40    Hull: Aluminum    Builder: McEarchen    Location: Alaska
40'x11.5'x5' Canadian aluminum gillnetter, built by McEarchern in 1970. 230 hp John Deere 6068 w/ 1,000 hours, new in 2017. Twin Disc 509 gear. 800 gallon fuel capacity in (2) aluminum tanks. Packs 20,000# in (3) insulated holds. Brand new shaft, cutlass bearing, and and shaft seal 2018. 10" shrimp block, Maritime Fabrication stern roller, new Kinematics drum with Twister drive and levelwind, aluminum picking boom, and (2) PL-2 Pullmasters. Electronics include GPS, VHF, radar, sounder, ComNav autopilot, and computer w/ Nobeltec. Great combination vessel with lots of recent upgrades. Call for survey. Asking $135,000.
$450,000
thumbnail CO18-001  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1970    Length: 72    Hull: Steel    Builder: Bender    Location: Alaska
72'x22'x9.9' steel combination vessel, built in 1970 by Bender. Rigged for crab, longline, and pot cod fishing. John Deere 6125 main rated at 360 hp, installed 2009. Twin Disc 514 6:1 gear. 20 kW Isuzu (rebuilt 2017) and 30 kW GMC gen sets. Major steel work done in 2005. 8,000 gal fuel, 3,000 water. Deck gear includes crab block, bait chopper, launcher, hauler, and more. Good electronics. Dungy pots, cod pots, and halibut gear available. Asking $450,000.
$625,000
thumbnail CO17-027  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1977    Length: 46    Hull: Fiberglass    Builder: Little Hoquiam    Location: California
46'x14.3' fiberglass combination crab/tuna/troller built by Little Hoquiam in 1977. Detroit 671 rated at 165 hp w/ Twin Disc 509 reduction gear. Isuzu C240 10kw genset. 1700 gallons fuel in (4) tanks. Blast freezer w/ Carrier compressor. Insulated fish hold packs 11k lbs of salmon. Crab tank insert holds 7k lbs crab. New Junes 19" crab block. 350 Custom 38" pots, fully rigged. Electronics include GPS, SSB, sounder, plotter, VHF, radar and autopilot. Includes CA 350 pot good to 51' LOA, CA and OR salmon permits. Call for a survey. Reduced to $625,000.
$415,000
thumbnail CO17-026  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1986    Length: 53    Hull: Fiberglass    Builder: Beck/LeClerq    Location: Alaska
53'x15'x3.5' fiberglass Beck/LeClerq seiner, built in 1986. Lugger 6125 main rated at 410 hp. Twin Disc 509 gear. Isuzu 30 kW gen set. IMS 15 ton RSW system chills 40,000 lbs. Rigged to seine with deck winch, power block, main boom w/ slider, (2) picking booms w/ PL4 winches. Electronics include VHF, GPS, radar, sounder, plotter, and ComNav autopilot. Seine gear available. Reduced to $415,000.
$1,150,000
thumbnail CO17-024  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1974    Length: 58    Hull: Steel    Builder: Peterson    Location: Alaska
58'x21'x7' steel combination vessel, rigged for seine, pots, longline and tendering. Built in 1974 by Peterson, original owner selling vessel. 425 hp John Deere 6135 main, new 2012, appr. 15K hrs. (2) Deere 6068 99 kW gen sets, new 2012, each with hydraulics on PTO. Packs 90,000# in 2 holds w/ 30 ton IMS RSW system, new in 2017. Walk-in bait freezer. Main boom w/ trolley and vanging, 2 picking booms. Shelter deck, longline hauler, pot launcher and hauler, coiler, bait chopper, bleeding table, 94 cod pots, and extensive longline gear included. Full electronics including Olex. Very well maintained with steady upgrades. Excellent condition with too much to list. Call for details. Asking $1,150,000.
$800,000
thumbnail CO17-023  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1978    Length: 70    Hull: Steel    Builder: Nichols Bros    Location: Alaska
70'x21'x9.5' steel dragger, currently used for research work. Built in 1978 by Nichols Bros. 425 hp Cat 353 main w/ appr. 14K hrs on overhaul. Burns 9 gph @ 8 kts. Twin Disc 4.5:1 gear. Yanmar 36 kW and Kubota 28 kW gen sets. Marco hauler and coiler, Yaquina YB5 trawl winches, net reel and gantry. 4 staterooms w/ 9 berths. Full electronics. Set up for research with laboratory, counter work space and computer space. 3 separate fish holds pack total of 35,000#. Call for recent survey. Asking $800,000.
$300,000
thumbnail CO17-019  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1984    Length: 64    Hull: Steel    Builder: Davies/Gillespie    Location: California
64'x18.5' steel schooner rigged as combination LL/pot/troller, built in 1984. Cat 334 rated at 250 hp. MG 509 gear w/ 4.5:1 ratio. John Deere 4219 30 kw and Isuzu 4.5 kw auxiliaries. Packs 80k lbs in insulated, polyurethane coated fish holds. 25 ton Bohn blast freezer. Stainless steel tuna gurdies, pot and LL haulers. 4400 gallons fuel capacity and 600 gallons fresh water. Electronics include GPS, VHF, SSB, (2) radars, sounder and autopilot. (4) berths in (2) staterooms. Asking $300,000.
$279,000
thumbnail CO17-014  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1990    Length: 57.1    Hull: Wood    Builder: Zirlott Boatyard    Location: Alaska
57.1'x18.6'x9.1' wood combination vessel rigged for tendering, longline, and pots. Built in 1990 by Zirlott Shipyard. Cummins NTA855 main rated at 350hp. Twin Disc gear with PTO. Perkins 30kw generator, rebuilt 2015. Packs 50k lbs in RSW, and 30k lbs iced. 18 ton RSW system w/ titanium chiller, new in 2015. Electronics include (2)VHF, SSB, ComNav autopilot, Dell computer, and Garmin GPS, radar, and sounder. Asking $279,000.
Web Design, 3 Crown Creative