Crabbers[55 listings]

Click here to be notified of updates to the Crabbers pagewatch helphelp
« first ‹ previous next › last »
Vessels 1 - 50 of 55
$390,000
thumbnail CR17-021  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1982    Length: 50    Hull: Steel    Builder: Glyn Latham    Location: Alaska
50'x15'x6.5' Monk design steel freezer troller/longliner, built by Glyn Latham in 1982. John Deere 6081 main, new in 2011. Twin Disc MG 509 w/ troll valve. 25 kW Isuzu gen set. Packs 30k lbs iced halibut, and 15k lbs salmon frozen at sea. 15-20 ton blast freeze system. Deck equipment includes 20' aluminum boom w/ PL-2, (2) 3-spool gurdies, longline hauler, and custom aluminum bait shed. Excellent electronics package includes (2) GPS, (3) VHF, SSB, radar, sounder, Furuno sonar, Furuno dual frequency sounder, and (2) computers w/ Nobeltec Catch and dual monitors at helm and stern. Turn key operation, call for survey. Asking $390,000.
$75,000
thumbnail CR17-020  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1970    Length: 28.7    Hull: Fiberglass    Builder: CandM Manufacturing    Location: California
28.7'x10'x3' fiberglass cruiser rigged for crab and trolling, built by CandM Manufacturing in 1970. Cummins 6BTA main rated at 330 hp w/ low hours. Twin Disc MG5061. Fuel capacity of 180 gallons in (2) tanks. Aluminum mast and trolling poles, (2) double hydraulic gurdies, crab block, and electric wash down pumps. Electronic equipment includes GPS, VHF, radar, sounder, and Raypilot 650 autopilot. CA salmon troll and CA 250 pot crab permit included, good to 28.7' max LOA. Asking $75,000 for the package.
$1,100,000
thumbnail CR17-019  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1993    Length: 55.5    Hull: Steel    Builder: Ratliff    Location: Oregon
55.5'x17.5' steel combination vessel, built in 1993 by Ratliff Bros. Rigged for crab, longline and troll. 855 Cummins w/ TD 514, 50 kW 4039 John Deere gen set. Electronics include (2) radar, (2) GPS, (2) SSB, (2) VHF, sounder, sat phone, ComNav auto pilot, and more. Accommodations for 5 crew. Deck gear includes bait chopper, 19" Junes block, Junes roller, Kolstrand longline drum and more. Hull recently blasted to cap rails. New fish hold, stainless fuel lines, and all fuel tanks cleaned in 2015. Holds 26,000# crab, 45,000# halibut w/ ice, 25 tons of tuna.  SOLAS 6 man raft (3 yrs old). Package INCLUDES Oregon 500 pot crab permit, fully rigged Trilogy pots and 24 foot trailer for pots. All good gear, no junk. Really clean boat, all in excellent condition. Asking $1,100,000 for everything.
$275,000
thumbnail CR17-018  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1990    Length: 57.1    Hull: Wood    Builder: Zirlott Boatyard    Location: Alaska
57.1'x18.6'x9.1' wood combination vessel rigged for tendering, longline, and pots. Built in 1990 by Zirlott Shipyard. Cummins NTA855 main rated at 350hp. Twin Disc gear with PTO. Perkins 30kw generator, rebuilt 2015. Packs 50k lbs in RSW, and 30k lbs iced. 18 ton RSW system w/ titanium chiller, new in 2015. Electronics include (2)VHF, SSB, ComNav autopilot, Dell computer, and Garmin GPS, radar, and sounder. Asking $275,000.
$130,000
thumbnail CR17-017  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1973    Length: 27    Hull: Fiberglass    Builder: Snowball    Location: California
27'x9' fiberglass crabber built by Snowball in 1973. 225 hp Honda outboard w/ 600 rebuilt hours. Top speed 30 kts, cruises at 20 kts. Holds 100 gallons fuel in (1) tank. Packs 2,500 lbs crab in deck totes. Hydraulics powered by Honda powerpack. Deck equipment includes 12" block, and aluminum davit, sort table, and dump box. Electronics include VHF, and Garmin 720s package w/ GPS, radar, sounder, and sonar. Package deal w/ 250 pot CA crab permit good to 30' LOA and 225 pots. Asking $130,000 for full package.
$400,000
thumbnail CR17-016  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1973    Length: 56    Hull: Steel    Builder: Nichols Bros    Location: Washington
56'x18'x9' house aft combination boat, built by Nichols Bros in 1973, Corten steel hull and house. Rigged for crab, longline, tuna, and salmon troll. Detroit Diesel 8V71 rated at 285 hp, appr 9,000 hrs. 65 kW John Deere gen set. Packs appr. 70,000# of salmon. Deck gear includes 19" crab block, Kolstrand gurdies, and tuna pullers. Electronics include Furuno GPS/radar, sounder, (2) plotters, ComNav autopilot and more. Asking $400,000.
$55,000
thumbnail CR17-009  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1959    Length: 37    Hull: Aluminum    Builder: Marco    Location: California
37'x12' aluminum crabber built by Marco in 1959. 8.2L Detroit diesel rated at 200 hp. Borg Warner 2.5:1 reduction gear. Fish hold insert packs 7k lbs of live crab. 17" Warren Junes power block. Electronics include GPS, VHF, radar, and sounder. 275 pots available to buyer. Asking $55,000.
$45,000
thumbnail CR17-015  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1976    Length: 29    Hull: Fiberglass    Builder: Modutech    Location: Oregon
29.1'x11.9' fiberglass combination crab/salmon/longliner built by Modutech in 1976. Perkins 6.354 rated at 160 hp. Borg Warner gear w/ 1.9:1 ratio. 300 gallon fuel capacity in (2) tanks. 17” Warren Junes crab block. Jim Harrison longline hauler. Salmon gurdies, aluminum poles and floppers. Packs 6,000 lbs of crab. Electronics include Furuno 1870F combo, autopilot, VHF, inverter and radar. Endorsed near shore permit available. Price reduced to $45,000 obo.
$95,000
thumbnail CR17-014  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1991    Length: 40    Hull: Fiberglass    Builder: HandH Marine    Location: Oregon
40'x12.8'x3.5' combination crab/salmon 'Lobster' style boat built in 1991 by HandH Marine. GMC 6V53 main w/ Twin Disc 506 reduction gear. Isuzu 12 kw genset. Vickers hydraulic pump. Packs 10k lbs crab in (3) tanked holds.Electronics include (2) GPS, (2) VHF, sat phone, Simrad sounder, radar, and ComNav autopilot. New spare GMC main w/ zero hours included. Heavily built boat in good condition. Asking $95,000.
$190,000
thumbnail CR17-013  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1974    Length: 40    Hull: Steel    Builder: Donald G Barber    Location: Oregon
40'x13'x6.3' steel combination crabber, tuna/salmon troller, with permits, built in 1974, bulbous bow added in 2015. 671 Detroit main rated at 174 hp. 1000 gallons fuel capacity. Isuzu 9 kw generator, new in 2015. Packs 16 tons. Crab block, crab tank insert, crab pots, landing table, and tuna/salmon gurdies. Electronics include GPS, (3) VHF, (2) radars, (1) sounder, (1) plotter, inverter and autopilot. Package includes 300 pot OR crab permit, approx. 250 pots and OR salmon and tuna troll permits. Asking $450,000 for the package, $190,000 for the boat alone.
$510,000
thumbnail CR17-012  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1968    Length: 50    Hull: Steel    Builder: Martin Allen    Location: California
50'x15.9' steel combination crab/tuna/troller built by Martin Allen in 1968. Cummins N14 rated at 480 hp. Twin Disc 514 reduction gear w/ 3:1 ratio. Isuzu 40kw aux. 10 ton spray brine system. Packs 20 tons of tuna in main hold and 10 tons in (5) smaller holds. (4) bait wells, bait racks, (2) large bait tanks and shed. (2) 3 spool salmon gurdies and (2) 5 spool Alliance stainless steel gurdies for tuna. Crab block, davit and (250) rigged 38" pots. Warren Junes hydraulics w/ electric clutch and a crab pump. 2,400 gallons fuel in (4) tanks. Complete electronics package. Permits include CA Crab 350 pot, CA and OR Salmon Troll and a Swordfish permit w/ new net. Call for a complete list and a survey. Asking $510,000.
$1,000,000
CR17-011  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1981    Length: 96    Hull: steel    Builder: Columbia Shipbuilders    Location: Alaska
96'x28'x8.5' steel crabber/tender, built in 1981 by Columbia Shipbuilding. Twin Cummins KTA 1150 mains rated at 400 hp ea. Cat 3306 185 kW, Cat 3306 125 kW, and Deere 55 kW gen sets. Packs 300,000# in two holds w/ RSW. (2) deck cranes (one new). Bait freezer. Full electronics. Flat bottom, shallow draft makes great tender. Contract available. Call for survey. Asking $1,000,000.
$1,100,000
CR17-010  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1945    Length: 133    Hull: steel    Builder: US Army    Location: Alaska
133'x30'x10.3' steel tender/crabber, built for US Army in 1945, converted to crabber/tender in 1978. Twin Cummins KTA 19M2 mains rated at 600 hp ea. Generators include 305 kW GMC 8V92, 275 kW 6V92, and Cummins 128 kW. Packs 450,000# w/ (3) separate RSW systems. Full electronics. Complete tendering setup with all deck gear, cranes, etc. Contract available. Call for survey. Asking $1,100,000.
$165,000
thumbnail CR17-008  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1974    Length: 38    Hull: Fiberglass    Builder: Delta    Location: Alaska
38'x12.9'x3.5' fiberglass combination boat, built by Delta / LeClercq in 1974. Rigged for gillnet, crab and shrimp. 200 hp John Deere w/ appr 4750 hrs. Packs 14,000# salmon. Main and picking booms w/ PL2 winches. 12” crab block. Honda driven circulation. Electronics include GPS, (2) VHF, radar, (2) sounders, ComNav pilot w/ remote. Asking $165,000. Also available are SE drift permit w/ drum and roller, SE Tanner permit, and longline hauler and roller.
$330,000
thumbnail CR17-007  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1978    Length: 50    Hull: Steel    Builder: Robert Warnick    Location: Oregon
50'x16'x7.5' steel combination crab/tuna/longliner built by Robert Warnick in 1978. GMC 671 rated at 200 hp. Capitol reduction gear w/ 3:1 ratio. 25 kW Isuzu 4JBI auxiliary. 2000 gallons of fuel in (4) separate tanks . Insulated fiberglass fish hold freezes 16 tons of tuna w/ 15 ton spray brine system. Stainless steel stern, troll cockpit and mast. Includes longline, tuna and salmon gear. Tempered glass forward windows, Lexan side and rear windows. Complete electronics package. OR 300 pot license and all crab gear available to buyer. Call for complete list and a survey. Asking $330,000.
$175,000
thumbnail CR17-006  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1946    Length: 40    Hull: Wood    Location: California
40'x12'x4.5' wood combination vessel rigged for crab, longline, and trolling, built in 1946. GMC 671 main 7,000 hours on rebuild. Fuel capacity of 300 gal in (2) tanks. Predator 4000 watt gas generator. 10,000 lbs total hold capacity, 4,200 lbs in aluminum insert crab tank. 17 inch crab block. (2) Kolstrand 3-spool gurdies. Electronics include GPS, VHF, plotter, ComNav 1001 autopilot, and Furuno radar and sounder. Comes w/ all crab, salmon, and longline gear. CA Crab Tier 7 and CA Salmon Troll permits included. Call for complete list. Asking $175,000.
$30,000
thumbnail CR15-007  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1989    Length: 48    Hull: Fiberglass    Builder: Growler Boat Works    Location: Alaska
48'x15.5'x7.5' combination crab/shrimp/sternpicker built in 1989 by Growler Boat Works. Twin Detroit 453 mains need work. Twin Disc 506 gears. 800 gallons fuel capacity. Yamaha 2.5 kw gas generator, Honda 1 kw gas generator. 12,000 lbs capacity. Kolstrand hydraulic block. Electronics include a Raytheon radar with split screen GPS, Furuno GP-32 GPS, Furuno sounder, (2) VHF and a Trace inverter. Estate must sell, price reduced to $30,000.
$45,000
thumbnail CO17-005  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1974    Length: 19    Hull: Fiberglass    Builder: Radon    Location: California
19'x8'x2' Radon rigged for crab and salmon troll. 225 hp Honda outboard w/ 450 hrs. New crab block runs on electro-hydraulic system. New 64 gal aluminum fuel tank. Packs 500 lbs. crab below deck. Electronics include VHF, Garmin GPS, plotter, and radar. Permits include 175 pot CA crab good to 19' and CA salmon troll. Comes with trailer. Asking $45,000.
$45,000
thumbnail CR17-004  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1974    Length: 19    Hull: Fiberglass    Builder: Radon    Location: California
19'x8'x2' Radon rigged for crab and salmon troll. 225 hp Honda outboard w/ 450 hrs. New crab block runs on electro-hydraulic system. New 64 gal aluminum fuel tank. Packs 500 lbs. crab below deck. Electronics include VHF, Garmin GPS, plotter, and radar. Permits include 175 pot CA crab good to 19' and CA salmon troll. Comes with trailer. Asking $45,000.
$950,000
thumbnail CR17-003  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1987    Length: 57.5    Hull: Steel    Builder: O.C. Fergusson Ltd    Location: Alaska
57.5'x20'x9' steel combination vessel rigged for seine/longline/pots, built in 1987 by O.C. Fergusson. John Deere 6135 main rated at 425 hp. Twin Disc MG 514C gear w/ 4.5:1 ratio. John Deere 4045 99kw (new 2016) and Isuzu 30kw generators. Bow thruster. 40 ton RSW system. Packs 150,000 in (4) holds. Full electronics package with Trac phone, ComNav autopilot w/ remote, (2) laptops w/ Nobel Tec software, and Lorex (3) camera monitoring system. Call for more information and survey. LLPs available for possible sale. Asking $950,000.
$400,000
thumbnail CR17-001  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1949    Length: 58    Hull: Steel    Builder: Long Marine    Location: Alaska
58'x16.5'x7' steel seiner/pot boat, built in 1949 by Long Marine. Cat D343 main rated at 330 hp. Isuzu 30 kw gen set. 15 ton IMS RSW system. Electronics include Furuno radar, (2) VHF, (2) GPS, Furuno sounder, ComNav autopilot, computer w/ NobelTec. Packs appr. 55,000#. New galley appliances. Asking $400,000.
$775,000
thumbnail CR16-026  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1974    Length: 58    Hull: wood/steel    Builder: Marine View Boat Bldg Co    Location: Alaska
58'x19.6' combination seine/crab built by Marine View in 1974. Major reconstruction in 2014-15. GMC 12V-71 main rebuilt in 2011 w/ Twin Disc 514 gear. John Deere 4045 65 Kw aux w/ electric clutch PTO and a Vickers 25 GPM pump. Updated keel coolers. 18 ton IMS RSW system chills 85k lbs of salmon in (2) recently reinsulated and relined fish holds. New stern fuel tanks, water tanks, mast and rigging. Marco 17" crab block, Marco seine block and false deck partition included. Full electronics package, plus video monitoring system. Call for a survey and a full list of upgrades. Reduced to $775,000.
$225,000
thumbnail CR16-025  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1964    Length: 58    Hull: Wood    Builder: Hansen    Location: Oregon
58'x16.5'x7.6' wood tender/crabber, built in 1964 by Hansen. 290 hp Detroit 8V71 main w/ appr 8,000 hrs on complete overhaul. New 25 kw Isuzu genset. 15 ton RSW system, packs 52,000 pounds in tanked fish hold. Hull recently recaulked. (2) picking booms w/ PL8 winches. 17" crab block. Electronics include (2) VHF, radar, color sounder, ComNav pilot, and more. Asking $225,000.
$1,200,000
thumbnail CR16-024  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1980    Length: 58    Hull: Fiberglass    Builder: Skandia Boat    Location: Washington
58'x18.5' fiberglass combination seine/crab/longliner built by Skandia in 1980. Efficient Isuzu main at 505 hp uses 7 gph. Twin Disc triple pump PTO and MG 514 gear. Isuzu 40 kw and John Deere 30 kw aux. Keypower 14" bow thruster. Chills 120k lbs salmon and 65 tons squid w/ twin 18 ton IMS chillers. Fish holds reconstructed at Delta Shipyard with 1" resin infused panels. Marco power block, Pilkington deck winch, crab davit, block and complete longline deck set up. Tufflex watertight deck coating. Redundant state of the art electronics and spacious galley with washer/dryer. Call for a survey and complete list of deck gear. Asking $1,200,000.
$1,075,000
thumbnail CR16-022  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1979    Length: 57.9    Hull: Steel    Builder: Union Bay Boat Works    Location: Washington
57.9'x27'x10' steel longliner that can easily be converted to seining, crabbing and pot cod. Originally built in 1979 and extensively rebuilt in 2007, including a bulbous bow and sponsons. Cummins KTA 19-M3 main rated at 640 hp. John Deere 50 kw and 27 kw generators. Teknotherm RSW. 95,000 lbs capacity in two fish holds. Full aluminum shelter deck, Marco autobaiter. Stainless hydraulic plumbing. Captains stateroom w/full head on bridge. Full shop and bait freezer in pilot house sponsons. Extensive electronics package including satellite compass, NavNet navigation system, Nobeltec navigation software, Furuno color video sounder and ECC Globe terrain building software. Top of the line vessel with numerous upgrades and recent shipyard work. Asking $1,075,000 for boat alone. WG pot, CG HAL, BS, and AI LLPs available at market value.
$265,000
thumbnail CR16-021  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1972    Length: 35    Hull: Fiberglass    Builder: Mel Martin    Location: Washington
35'x11.6' fiberglass crabber built by Mel Martin in 1972. Cat 3056D rated at 205 hp with ZF gear both new in 2009. (2) new aluminum fuel tanks with 270 gallons capacity. Fully rigged and ready to crab. Packs 10,000 lbs crab. Electronics include Robertson autopilot, radar, SSB, (2) GPS, and sounder. Remodeled galley with diesel stove, microwave, hot water, shower, head and (6) berths. Complete package including Puget Sound crab permit, 100 crab pots and portable generator. Asking $265,000 for boat and permit.
$465,000
thumbnail CR16-018  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1995    Length: 51    Hull: Fiberglass    Builder: Skookum/First Cabin    Location: Alaska
51'x15' fiberglass combination longline/pot/seiner built by Skookum/First Cabin in 1995. John Deere 6068 at 330 hp. Twin Disc 3:1 ratio. John Deere 40 kw genset. 1,200 galllons fuel in 2 tank. Packs 40,000 lbs in fiberglass holds. Cold Sea 18 ton RSW and 5,000 lbs plate freezer. Full aluminum longline forward and aft shelter. Kohlstrand longline hauler, 15" Junes crab block and Junes davit and valves. Electronics include (2) radars, (2) VHF, (2) GPS, computer, (2) sounders, ComNav autopilot and hailer. Dickinson stove, hot water heater, shower, (4) berths and day bunk in wheel house. Asking $465,000.
$1,600,000
thumbnail CR16-012  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1977    Length: 86    Hull: Steel    Builder: John Manly Shipyard    Location: BC
86'x24' steel combination vessel, built by John Manly Shipyard in 1978. Cummins KTA38 at 730 hp with low hours on rebuild. Twin Disc MG 527 5.17:1 gear. (2) Cummins 125 kw and 75 kw auxiliaries. New Dole plate freezer for black cod and tuna. Packs 140,000 lbs frozen and appr. 250,000 lbs wet. 13,000+ gallons fuel capacity. Electronics including satellite compass, (3) Furuno sonars, (2) radars, (3) GPS, (2) computers, (2) SSB, ComNav autopilot, and much more. Commercial grade galley with washer and dryer. Price reduced to $1,600,000.
$2,700,000
thumbnail CR16-011  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1978    Length: 160    Hull: Steel    Builder: Bender    Location: Washington
160'x35'x14.25' steel ex-crab catcher/processor, built in 1978 by Bender. Twin Lugger 6170 mains rated at 700 hp ea. (2) 300 kw GMC 8V92 gensets and (1) 650 kw Cummins KTA38GI gen set. 60' x 30' clear deck area. Quarters for 32 people. 81,500 gallons fuel, 24,500 water. Vessel has been used for research, crab, and longline. Recent 5 year ABS loadline renewal. Call for survey or additional info. Asking $2,700,000.
$30,000
thumbnail CR16-010  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1971    Length: 29    Hull: Fiberglass    Builder: Modutech    Location: Oregon
29'x11' fiberglass crabber/longliner, built in 1971 by Modutech. Perkins diesel rated at 225 hp. 4 man life raft. Electronics include GPS, (2) VHF, Furuno radar, (2) plotters, sounder, VMS, and more. Asking $30,000 obo for the vessel. OR 200 pot crab and Nearshore rockfish permits available with vessel.
$310,000
thumbnail CR16-009  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1950    Length: 50    Hull: Steel    Builder: William P Johnson    Location: California
49'x14.3'x6.1' steel combination California crabber, dragger, troller built in 1950. Cummins 855 at 325 hp main. Twin Disc gear 509. Perkins 22 kw generator. 2,100 gallons fuel capacity in 5 tanks. IMS blast freezer. Deck equipment includes net, boom, net reel, winches, outriggers and 70 crab pots. Electronics include ComNav autopilot, Furuno GPS, Raytheon sounder, VHF and a Furuno 24 mile radar. CA 250 pot permit included. Asking $310,000.
$320,000
thumbnail CR16-008  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1970    Length: 39    Hull: Aluminum    Builder: Rohd    Location: California
39'x16' aluminum crabber built in 1970 by Rohd. Twin Detroit mains rated at 425 hp. Packs 6,000 lbs. Electronics include GPS, (2) VHF, Furono radar, sonar, sounder. New top house, crab tank, Glendinning engine controls, shaft and bearing. Includes a 250 pot California crab permit, crab block, davit, dump box and 183 (40") pots. Asking $320,000 for everything.
$125,000
thumbnail CR16-007  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1964    Length: 54    Hull: Wood    Builder: Sagstad    Location: Oregon
54'x16'x8' combination seine/troll/crab, built in 1964 by Sagstad Marine. Detroit 8V71 main. Twin Disc 509 gear with a top mount PTO. Isuzu 10 kw genset. Seine deck winch, power block, and bait chopper. Furuno GPS, Icom VHF, Icom SSB, Furuno radar and Furuno sounder. Asking $125,000.
$119,000
thumbnail CR16-005  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1977    Length: 40    Hull: Fiberglass    Builder: Westport    Location: Oregon
40'x11.3'x6.1' Westport Marine fiberglass troller/crabber built in 1977. GM 8V71 main rated at 230 hp. Twin Disc gear 509 2:1. 8,000 pounds fish hold capacity. (2) sets of 3 spool Kolstrand gurdies, insulated hydraulic gurdies and 17" NW Propellor crab block. Electronics include a VHF, VMS, SSB, 2 meter, CB ADF, radar, GPS, depth sounder, computer and auto pilot. Price includes an OR salmon troll permit. Asking $119,000.
$325,000
thumbnail CR16-003  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1977    Length: 50    Hull: Steel    Builder: Carol Seals    Location: Oregon
50'x15'x8.6' combination tuna salmon troller with OR and CA salmon troll permits, also rigged for crab built in 1977 by Carol Seals. John Deere 6076 AFM30 main rated at 300 hp. Twin Disc gear MG 509. John Deere 40kw and Isuzu 20kw generators. 3,600 gallons fuel capacity. (2) 200 gallon deck fuel tanks. 500 gallons fresh water capacity. Carrier 5F40 compressor, Cold Mac blast freezer. 30,000 pounds of tuna capacity and 9,000 crab capacity in a insert tank. Crab davit, block, tuna pullers and salmon gurdies. Electronics include (2) VHF, SSB, 2 meter, radar, VMS, GPS, sounder, autopilot and computer with navigation software. OR 500 pot crab permit good to 57 feet available. Asking $325,000.
$130,000
thumbnail CR16-002  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1975    Length: 44    Hull: Steel    Builder: Monk design    Location: California
44'x13'x6.2' Monk design steel CA salmon troll package. Cummins QSL9 rated at 285 installed new in 2009. Daewoo 24kw generator installed new 2009. Aluminum boom with vanging and 2 Pullmaster winches, pot hauler, boom mounted davit and Tulsa deck winch. Two large fish holds. All new bulwarks and trolling poles. Electronics includes ComNav autopilot, (3) Garmin GPS,Garmin radar, Simrad autopilot, Garmin and Furuno color sounders. Package includes CA salmon permit. Price reduced to $130,000.
$1,350,000
thumbnail CR15-045  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1991    Length: 58    Hull: Steel    Builder: Fred Wahl    Location: Washington
58'x20'x9' steel seiner, crabber, longliner, trawler built by Fred Wahl in 1991. Cummins KT-1150 main, 425 hp, major overhaul w/warranty in 2015. Twin Disc MG-516C 4.5:1 gear new in 2010. (2) Cummins 6BT 5.9 auxs with 50 and 55 kw gens. 12 kw hotel unit. 30 ton RSW. Completely sealable shelter deck. Asking $1,350,000 for boat alone. With all deck gear including 24 ft knuckle crane, crab block, pot launcher, bait chopper, coiler, longline hauler, hatch coaming longline table, and sorting table, cod pots, and LLP permits for CG, WG and BS asking $1,550,000.
$2,400,000
thumbnail CR15-044  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1990    Length: 119    Hull: Steel    Builder: Long Marine    Location: Alaska
119'x26' steel crabber/tender, built in 1990 by Long Marine. Twin 402 hp Cat 3408B mains. (2) Cat 3306B 165 kw and (1) John Deere 55 kw gen sets. Separate 30 ton and 25 ton RSW systems. Packs 180,000# crab, appr. 350,000# salmon in 3 holds. (2) deck cranes and picking boom. Well equipped, well maintained, ready to fish and pack fish. Call for recent survey. Asking $2,400,000.
$250,000
thumbnail CR15-039  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1960    Length: 54    Hull: Steel    Builder: Marco    Location: Washington
54'x16.5'x8.3' steel crabber/seiner, built in 1960 by Marco. GMC 8V71 rated at 270 hp. 9 kw Kohler gen set, Perkins D3152 for hydraulics. Currently rigged for crab with hydraulic ram and crab block. Self-pursing deck winch and seine boom included. Packs 70,000# of salmon. Electronics include Garmin GPS, SEA222 SSB, radar, sounder, Garmin plotter, ComNav autopilot, and Wesmar sonar. 500 pot good to 64ft WA crab permit available. Asking $250,000.
$1,700,000
thumbnail CR15-037  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1991    Length: 58    Hull: Steel    Builder: John A Karuza    Location: Washington
58'x21'x10' ideal combination vessel rigged for seining, longlining and crabbing. Monk design built in 1991. John Deere 6135 450 hp main installed new 3 years ago. Twin Disc MG 516 gear w/ trolling valve, installed new 3 years ago. John Deere 65kw (new 3 years ago) and Isuzu 20kw generators. Bow thruster. Two hermitic Copland 12 ton and 15 ton RSW systems chills 90,000 pounds in 2 fish holds. 7,500+ gallons fuel capacity. Electronics include (2) Icom VHF, Furuno GPS, Furuno depth indicator, Standard Horizon Chart, Simrad autopilot, satellite compass, satellite phone, and (2) radar. Asking $1,700,000.
$375,000
thumbnail CR15-015  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1990    Length: 42    Hull: Aluminum    Builder: Hydraulic Fishing Supply    Location: Alaska
42'x14.5'x4' combination seiner/gillnet vessel built in 1990 by Hydraulic Fishing Supply. Recently rebuilt twin Cat 3208 mains rated at 850 total horsepower. Recently rebuilt Twin Disc gears and new shafts. New 30kw Kabota generator and 12 ton RSW system. New hydraulic system including (2) 8.6 Eaton compensating pumps. Maritime Fab power roller and auto levelwind. Electronics include (3) VHF, ComNav autopilot, Furuno radar, Furuno color sounder, laptop and Furuno GPS. lots of recent work. Also available is a PWS drift and PWS seine permits. Can be available with the seine package. Gillnet ready, asking $375,000.
$790,000
thumbnail CR15-030  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2010    Length: 58    Hull: Steel    Builder: Kodiak Marine Construction    Location: Washington
58'x24'x8' combination seiner/crabber/tender built in 2010 by Kodiak Marine Construction. Twin John Deere mains rated at 325 hp each. ZF gears. Wesmar bow thruster. IMS 18 ton RSW system chills 150,000 lbs. 2,400 gallons fuel capacity. Seine gear includes a Kolstrand power block w/ gripper and deck winch w/ pursing shives. Free standing mast, (2) port and starboard mounted cranes, main boom. Electronics include Furuno multifunction unit, (radar, GPS,depth sounder, plotter), ASU laptop with Captains software, Wesmar sonar, Furuno color sounder, (2) VHF, Satellite phone and WH autopilot. Reduced to $790,000.
$45,000
thumbnail CR15-028  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1986    Length: 32    Hull: Fiberglass    Builder: Modutech    Location: Washington
32'x12'x2.5' fiberglass crabber built in 1986 by Modutech. Cat 3208 main rated at 265 hp. 506 Twin Disc gear. New dripless shaft and extra propellor. 13 knots WOT. 300 gallons fuel capacity. 5,000 lbs salmon capacity. Crab block and davit. Aluminum drum. Kinematics anchor winch. LED Lighting, LED Lighting. Garmin GPS, Icom, VHF, Furuno sounder, Garmin plotter and a 200 watt inverter. Asking $45,000.
$279,999
thumbnail CR15-026  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1979    Length: 54.5    Hull: Steel    Builder: Charles Oswald    Location: Oregon
54.5'x15.9'x7.8' steel combination crab/troll/drag vessel built in 1979 by Charles Oswald. Isuzu UM6HK1 main rated at 350 hp. Isuzu 4JG1 37kw genset. 18 ton IMS spray brine system. 4,000 gallons fuel and 500 gallons fresh water capacity. Electronics include Icom SSB, Icom VHF, Shakespeare VHF, Anritsu radar, JRC radar, Furuno GPS, Interphase chart plotter, Furuno plotter, Wood Freeman autopilot, sea temp indicator and weather chart system. OR salmon troll permit available. Reduced to $279,999.
$450,000
thumbnail CR15-024  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1969    Length: 56.6    Hull: Steel    Builder: Lackey    Location: Oregon
56.6'x16.5'x9.1' steel combination vessel built by Paul Lacky in 1969. Twin Cummins 8.3 liter 300hp mains. rebuilt in 2014. Twin Disc 509 3:1 gears. John Deere 4 cylinder 65kw aux. Deck equipment includes 3-spool gurdies, tuna pullers, long line hauler, and 19" Junes crab block. Electronics include VHF, SSB, CB, sounder, computer/plotter, radar, and auto pilot. Permits include Oregon 300 pot crab and Oregon salmon troll. Asking $450,000.
$29,500
thumbnail CR15-020  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1961    Length: 34    Hull: Aluminum    Builder: Matsumoto    Location: Washington
34'x11' coastal crabber built by Matsumoto in 1961. 454 Chev Crusader main engine. Borg Warner 2.57:1 gear. 8 knot cruise and 15 knot WOT. (2) 15" Humbyrd crab blocks and recently rebuilt gillnet reel included. Triple axle boat trailer. Electronics include GPS and VHF. Motivated seller. Reduced to $29,500.
$30,000
thumbnail CR15-019  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1987    Length: 26    Hull: Fiberglass    Builder: home built    Location: Washington
26'x9'x2.5' fiberglass combination skiff built in 1987. 270 Crusader gas main with a new propellor. 350 Mercrusier spare main. 100 gallon aluminum fuel tank. 15 knot cruise. Fuel tanks, Aft deck, and gunnels new in 2009. Aluminum crab davit, 12" block and spare propellor. V berth provides storage. Electronics include Raytheon sounder, plotter and radar all in one. 8'x11.6" of open deck. Galvanized tandem axle trailer with surge brakes and new tires. Asking $30,000.
$390,000
thumbnail CR15-017  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1979    Length: 41.5    Hull: Fiberglass    Builder: Modutech    Location: Oregon
41.5'x11.5'x5' fiberglass crabber/troller, built in 1979 by Modutech. Partially enclosed tophouse. GMC 6V92 rated at 300 hp, 7.5 kw Whisper Watt gen set. Bait chopper, 17" crab block on davit, and 3 spool Simplex gurdies. Electronics include (2) GPS, (2) VHF, radar, (2) sounders, plotter, and ComNav autopilot. 4-man liferaft. Comes WITH 250 pot CA crab, 300 pot OR crab, and OR salmon troll licenses. Price reduced to $390,000. 300 pots available for sale to buyer of vessel.
$375,000
thumbnail CR15-011  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1979    Length: 89    Hull: Steel    Builder: Halls Mill    Location: Alabama
89'x22.4'x11.2' combination vessel in 1979, but completely rebuilt including 60% hull re-plating. Cat 3412 main rated at 600 hp, recently rebuilt with only 600 hours. Cummins 100 kw with 163 hours, Cummins 80 kw with 2.9 hours and Isuzu 12.5 kw generator. 3,500 cubic ft. fish hold. Complete refrigeration package with two screw compressor. All new safety gear. Electronics include GPS, VHF, Furuno radar, plotter and autopilot. Has 5 staterooms with 10 berths. $375,000.
$80,000
thumbnail CR15-005  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Length: 35    Hull: Fiberglass    Builder: unknown    Location: British Columbia
35'x12'x4' fiberglass crabber/prawn vessel. Volvo 71 main rated at 400 hp with only 200 hours. 16 know cruise. 14” hydro slave hauler, davit and sorting table. Electronics include GP-32 GPS, Standard Horizon VHF, Tough Book computer, Furuno radar, Furuno sounder, Nobeltech plotter and Xantrex 2000 watt inverter. Asking $80,000.
Web Design, 3 Crown Creative