Sternpickers[27 listings]

Click here to be notified of updates to the Sternpickers pagewatch helphelp

Vessels 1 - 27 of 27
$135,000
thumbnail SP19-006  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1975    Length: 46    Hull: Fiberglass    Builder: Martin/Lindell    Location: Washington
46'x12'x5' flush deck combination vessel rigged for gillnetting. Built in 1975 by Mel Martin and stretched by Lindell. Detroit 8V71 rated at 260 hp w/ Twin Disc 509 gear 2.5:1 ratio. Packs 15k lbs in (9) insulated fish holds . (2) fuel tanks w/ 450 gallons combined capacity. Curry drum on rails, w/ levelwind and stern roller. Boom w/ electric winch. Bowthruster and crows nest w/ controls. Electronic include GPS, VHF, computer, sounder, (2) plotters, sonar and autopilot. Diesel heating, washer/drier combo, (4) berths, fridge and hot water. Asking $135,000.
$60,000
thumbnail SP19-005  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1975    Length: 41    Hull: Fiberglass    Builder: Deltaga Boat Works    Location: BC
41'x11'x4' fiberglass troller/gillnetter built by Deltaga Boat works in 1975. Cat 3208 main engine rated at 225 hp. Twin Disc 506 gear with 4:1 ratio. (1) insulated fish hold, coil-chilled. Deck equipment includes a drum and power roller. Accommodations include a head and new stove. Electronics include a GPS, plotter, VHF, Furuno radar and sounder, and Com Nav autopilot. Asking $60,000.
$55,000
thumbnail SP19-004  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Length: 32    Hull: Fiberglass    Builder: Central Marine    Location: California
32'x10'x3' fiberglass Monterey double-ender salmon troller, also rigged for gillnet. 1977 Central Marine hull, completed in 1996 w/ additional reinforcement. Isuzu 4cyl main rated at 60hp, w/ only 1200 hours. Borg Warner gear w/ 2:1 ratio. Packs an estimated 6,000# in fish hold. Deck equipment includes crab block, gillnet reel w/ nets, (2) 2-spool gurdies, and lots of additional equipment and accessories. Electronics include VHF, radar, sounder, plotter, and autopilot. Includes CA Salmon troll permit and herring gillnet permit. Turn-key boat with permits and gear. Asking $55,000.
$135,000
thumbnail SP19-003  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1974    Length: 35    Hull: Fiberglass    Builder: Roberts    Location: Alaska
35'x11.5'x5' fiberglass sternpicker built by Roberts in 1974. John Deere 6068 main rated at 230 hp, w/ Twin Disc gear. Fuel capacity of 380 gallons in (2) tanks. Tanked and insulated fish hold packs 11,000# in slush ice. Deck equipment includes gillnet reel w/ Twister drive, longline drum w/ Twister drive, buoys, ground line, picking boom w/ hauler, and 500 ftm of corkline/leadline. Electronics include GPS, VHF, radar, sounder, ComNav 1101 autopilot, and Asus computer w/ Compass Rose. Call for survey. Asking $135,000.
$160,000
thumbnail SP19-002  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1970    Length: 39.5    Hull: Fiberglass    Builder: Westport    Location: Alaska
39.5'x12.5'x3.7' fiberglass sternpicker/troller built by Sunfjord in 1970. Cat 3208NA rated at 215 hp. Twin Disc 506 reduction gear w/ 3:1 ratio. Packs 10k lbs in (6) insulated and tankable fish holds. Electric boom winch, gillnet drum w/ hayrack,rebuilt Twister drive, power roller and (2) 3 spool Hasbra trolling gurdies. Rigged for gillnet and trolling. Recent improvements include PSI shaft system, new stern bearing, new coupling, hydraulic pump, (3) station Kobelt pwr steering and ram. 500 gallons fuel and 80 gallons water. New wiring, Blue Seas panel, and 100 amp Charge Master. Electronics include GPS, radar, sounder, plotter, inverter and autopilot w/ computer. Dickinson stove, (3) berths, Red Dot, head and shower. Asking $160,000 for everything.
$35,000
thumbnail SP19-001  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1969    Length: 30    Hull: Fiberglass    Builder: Blix    Location: Oregon
30'x10'x3' fiberglass Columbia River gillnetter, built by Blix in 1969. Perkins diesel main rated at 120 hp, w/ Velvet Drive gear. Cruises at 9 knots w/ excellent fuel consumption. 7.5 Vickers hydraulic pump w/ electric clutch. Packs 4,200# salmon in one fish hold. Includes reel w/ levelwind and hydraulic stern roller. Electronics include VHF, sounder, and computer. Very clean turn-key package with lots of recent upgrades. Call for more information. Asking $35,000.
$135,000
thumbnail SP18-025  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1985    Length: 38    Hull: Fiberglass    Builder: Roberts    Location: Alaska
38'x12'x4' fiberglass sternpicker/dive built by Roberts in 1985. Cat 3126 rated at 350 hp w/ Twin Disc MG507 gear. 300 ftm net reel w/ levelwind and power roller. (7) fish holds pack 15k lbs salmon. Includes dive ladder, cuke/geoduck table, LL drum, ground line w/ snaps and hooks. Picking boom w/ Custom hydraulic winch and main boom w/ Rotzler winch. Electronics include radar, VHF, sounder, (2) GPS, autopilot and inverter. Diesel stove, freezer, (4) berths, head, shower and TV. Call for survey. SE Drift permit and nets available. Asking $135,000.
$235,000
thumbnail SP18-024  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1991    Length: 40    Hull: Fiberglass    Builder: Lindell    Location: Washington
40'x13'x6' fiberglass combination crabber/troll/gillnetter built by Lindell in 1991. Lugger 6108 rated at 330 hp w/ Twin Disc 507 gear. Isuzu 3 cylinder aux w/ 10kW genset. (5) insulated fish holds back 10k lbs salmon or 5k lbs crab. Enclosed fly bridge and aluminum bait shed. Crab block, dump box, Hasbra gurdies, trolling poles, gillnet reel, and power roller. 600 gallons combined fuel capacity in (2) tanks. Electronics include SSB, radar, (3) GPS, VHF, plotter, autopilot and many more. Dickenson stove, shower, head, (4) berths, focsle heater and chest freezer. Call for a survey. Asking $235,000.
$85,000
thumbnail SP18-023  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1970    Length: 36    Hull: Fiberglass    Builder: Albion    Location: Alaska
36'x10.5'x4' fiberglass sternpicker, built by Albion in 1970. Volvo MD-70A rated at 140 hp. Capitol 2HEA reduction gear. 12 gpm hydraulic pump on Pitts clutch. Packs 10,000 in (7) holds setup for slush bags. KEM hydraulic drum and McElroy 40" hydraulic stern roller. Electronics include GPS, VHF, Raytheon radar, Furuno sounder, Robertson autopilot, and Laptop w/ Rosepoint navigation software. Includes (4) nets and associated gear. Call for survey. Asking $85,000.
$40,000
thumbnail SP18-021  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1962    Length: 32    Hull: Fiberglass    Builder: West Coast Marine    Location: Alaska
32'x10.4'x4.3' fiberglass, tophouse, sternpicker, built by West Coast Marine in 1962. Cummins 6BTA 5.9L main rated at 210 hp, w/ 4,000 hours. Twin Disc 509 gear. Portable Honda generator. Fuel capacity of 264 gallons in (2) tanks. Packs 8,000# in (8) holds. Queensborough hydraulic drum and Kinematics stern roller. Electronics include GPS, (2) VHF, Furuno radar, Sitex sounder, Garmin plotter, and ComNav 1420 autopilot. SE Drift permit available. Call for survey. Asking $40,000 for the vessel, or $120,000 as a package.
$170,000
thumbnail SP18-006  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1982    Length: 32    Hull: Fiberglass    Builder: Wegley    Location: Alaska
32'x13'x3' fiberglass, flush deck, sternpicker, built by Wegley in 1982. Volvo TAMD 71B main, rated at 380 hp. Twin Disc 509 gear. Fuel capacity of 300 gallons in fiberglass tank. Flush decked in 2011, w/ aluminum hatch covers and combings. Packs 18k lbs in (7) insulated holds. Includes uninstalled 7.5 ton PacWest RSW system. Maritime Fab power roller, slider, White hydraulic drum drive, and manual levelwind. Electronics include Garmin GPS, plotter, sounder, Furuno radar, (2) VHF, and uninstalled Sitex autopilot. Call for list of recent upgrades. Located in WA. Reduced to $170,000.
$30,000
thumbnail SP18-019  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1959    Length: 32    Hull: Aluminum    Builder: Marco    Location: Alaska
32'x12' aluminum sternpicker built by Marco in 1959. Detroit 4-53 w/ approx. 5,500 hours. Borg Warner 72C gear. Sound Marine roller, aluminum reel w/ Twister drive. Vickers V-20 hydraulic pump and belt drive wash down pump. (2) 100 gallon fuel tanks. Electronics include GPS, VHF, radar and depth sounder. Asking $30,000.
$270,000
thumbnail SP18-016  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1985    Length: 32    Hull: Aluminum    Builder: Hydraulic Fishing Supplyr    Location: Alaska
32'x14' aluminum flush deck sternpicker built in 1985 by Hydraulic Fishing Supply. Detroit 6V92 main engine rated at 420 hp. Twin Disc 509 gear with 2:1 ratio. 7.5 to IMS RSW system, completely overhauled in 2017. Holds 25,000#. Deck gear includes Maritime Fab reel with levelwind and Kinematics power roller. Electronics include (2) VHF, (2) Garmin plotters, and (2) Garmin sounders. Includes extensive gear. Very well-maintained. Asking $270,000.
$85,000
thumbnail SP18-013  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1969    Length: 38    Hull: Fiberglass    Builder: Unknown    Location: Alaska
38'x12.5' sternpicker, fiberglass over wood, built 1969. Rigged for gillnet and shrimp pot fishing. 250 hp Cummins 6BTA, appr. 15,000 hrs. Northern Lights gen set. 7.5 ton IMS hydraulic RSW system. Gillnet drum w/ Twister drive, leadline slinger. Electronics include GPS/plotter, radar, and sounder (all Sitex) VHF, and inverter. Asking $85,000 for boat alone. Shrimp package w/ vessel, all gear, removable electric blast freeze system, and SE shrimp pot permit for $139,000.
$389,500
thumbnail featured listing SP18-010  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2015    Length: 40    Hull: Fiberglass    Builder: Wegley    Location: Washington
41.5'x13'x4' fiberglass combination vessel, rigged for crab and gillnet. Hull built by Wegley, completed in 2016. CAT C-9 main rated at 503 hp, w/ appx. 1,000 hours. ZF 360A reduction gear. Westerbeke 5.5 kW gen set. 640 gallon fuel capacity. 16 knot cruising speed and 24 knot max. Packs 25,000 #s in one fish hold. Aluminum mast and boom. Electronics include GPS, VHF, Furuno radar, sounder and plotter, ComNav autopilot, and Xantrex inverter. Very clean boat and turn-key operation. Call for survey and more information. Reduced to $389,500.
$45,000
thumbnail SP18-005  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1971    Length: 30    Hull: Fiberglass    Builder: Modutech    Location: Washington
30'x10.5'x3' fiberglass gillnetter, built by Modutec in 1971. CAT 3116 main rated at 300 hp, w/ approx. 3,000 hours. Twin Disc 506 gear. Fuel capacity of 215 gallons, and burns 3 gph at 9 knot cruise. Packs 4,000# in (4) semi-insulated holds. Hydraulic drum, levelwind, and stern roller. Electronics include GPS, Garmin plotter, VHF, sounder, and Raytheon radar. Puget Sound drift permit and gear available. Asking $45,000.
$255,000
thumbnail SP18-002  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1979    Length: 40    Hull: Fiberglass    Builder: Snoball    Location: Alaska
40'x11'x4' fiberglass sternpicker, built by Snoball in 1979 and completely rebuilt in 2010. Volvo TAMD 74p main rated at 480 hp, w/ 950 hours. Twin Disc 507 gear. Cruises at 18 kt, top speed of 22 kts. Fuel capacity of 450 gallons in (2) new aluminum tanks. Packs 13,000# salmon in (7) holds. 2010 rebuild included new AJR windows/door, wiring, fuel lines, and hydraulic lines. Maritime Fab sliding drum w/ levelwind, and Kinematics leadline slinger. Electronics upgraded, including GPS, VHF, 2-meter, radar, sounder, plotter, and autopilot. Clean and turnkey operation. Call for survey and complete list of upgrades. Reduced to $255,000.
$135,000
thumbnail SP18-001  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1970    Length: 40    Hull: Aluminum    Builder: McEarchen    Location: Alaska
40'x11.5'x5' Canadian aluminum gillnetter, built by McEarchern in 1970. 230 hp John Deere 6068 w/ 1,000 hours, new in 2017. Twin Disc 509 gear. 800 gallon fuel capacity in (2) aluminum tanks. Packs 20,000# in (3) insulated holds. Brand new shaft, cutlass bearing, and and shaft seal 2018. 10" shrimp block, Maritime Fabrication stern roller, new Kinematics drum with Twister drive and levelwind, aluminum picking boom, and (2) PL-2 Pullmasters. Electronics include GPS, VHF, radar, sounder, ComNav autopilot, and computer w/ Nobeltec. Great combination vessel with lots of recent upgrades. Call for survey. Asking $135,000.
$135,000
thumbnail SP17-016  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1979    Length: 39    Hull: Fiberglass    Builder: Kipida Co.    Location: Alaska
39'x11.2'x6' fiberglass gillnetter/troller, built by Kipida Co in 1979. CAT 3208 main rated at 210 hp, w/ 4,000 hours. Twin Disc 506 gear. 3.2 kw Yanmar auxilary. 500 gallon fuel capacity in (2) tanks. Packs 10,000 lbs in (3) insulated fish holds. Aluminum reel w/ Kinematic Twister drive, level wind, 40' aluminum stabilizer poles and hay rack. Electronics include (2) VHF, SSB, (2) radar, Furuno sounder, Raymarine autopilot, and laptop w/ Nobeltec. SE drift permit available. Trolling poles and Kolstrand hand troll gurdies included. Loads of gear and spare parts, call for more information and survey. Asking $135,000 for the boat, or $225,000 with SE drift permit.
$285,000
thumbnail SP17-013  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1988    Length: 42    Hull: Fiberglass    Builder: Polar Bear Works    Location: Alaska
42'x14.5'x7.5' fiberglass gillnetter, rigged as troller/pleasure vessel. Built by Polar Boat Works in 1988 and refurbished in 2006. L-6125A model Lugger rated at 440 hp, rebuilt in 2012. Twin Disc MG-509 w/ trolling valve. Fuel capacity of 600 gallons in (2) new aluminum tanks. 3.5 kW gas Honda generator. Fish hold capacity of 20k lbs, currently used for storage. Electronics include (3) VHF, Furuno Nav-Net Vx2 radar/plotter/sounder, and ComNav autopilot. Asking $285,000.
$105,000
thumbnail SP17-012  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1974    Length: 40    Hull: Fiberglass    Builder: Mel Martin    Location: Alaska
40'x11.7' fiberglass flush deck sternpicker built as a 36' by Mel Martin, then extended to 40'. Cummins 6BTA rated at 250 hp. Twin Disc MG506 gear w/ 2.5:1 ratio. (6) fish holds. Hydraulic reel, level wind and Marco power roller. Aluminum outriggers w/ SS cable. 2" wash down. 400 gallons fuel capacity. Electronics include (2) VHF, GPS, inverter and radar. Sleeps (5), Red Dot heater, propane stove with oven. Reduced to $105,000.
$130,000
thumbnail SP17-010  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1974    Length: 38    Hull: Fiberglass    Builder: Delta    Location: Alaska
38'x12.9'x3.5' fiberglass combination boat, built by Delta / LeClercq in 1974. Rigged for gillnet, crab and shrimp. 200 hp John Deere w/ appr 4750 hrs. Packs 14,000# salmon. Main and picking booms w/ PL2 winches. 12” crab block. Honda driven circulation. Electronics include GPS, (2) VHF, radar, (2) sounders, ComNav pilot w/ remote. Also available are SE drift permit w/ drum and roller, SE Tanner permit, and longline hauler and roller. Reduced $130,000.
$375,000
thumbnail SP14-009  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1990    Length: 42    Hull: Aluminum    Builder: Hydraulic Fishing Supply    Location: Alaska
42'x14.5'x4' combination seiner/gillnet vessel built in 1990 by Hydraulic Fishing Supply. Recently rebuilt twin Cat 3208 mains rated at 850 total horsepower. Recently rebuilt Twin Disc gears and new shafts. New 30kw Kubota generator and 12 ton RSW system. New hydraulic system including (2) 8.6 Eaton compensating pumps. Maritime Fab power roller and auto levelwind. Electronics include (3) VHF, ComNav autopilot, Furuno radar, Furuno color sounder, laptop and Furuno GPS. lots of recent work. Also available is a seine permit. Can be available with the seine package. Gillnet ready, asking $375,000.
$300,000
SP15-006  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1978    Length: 44    Hull: Fiberglass    Builder: Seahorse    Location: Alaska
44'x12' fiberglass gillnetter, built by Seahorse. Original construction in 1978, but complete rebuild in 2015. Deck, fishhold, tanks, and house aft bulkhead removed and refabricated. New deck gear, shaft and steering ram. John Deere 6068 rated at 205 hp, Northern Light 6kw gen set. New Maritime Fab drum and roller, new PL2 boom winch. Electronics include GPS, (2) VHF, Furuno radar, sounder, plotter, autopilot, and new Furuno Navnet. Too much recent work to describe. Call for details. Asking $300,000, $400,000 w/ SE drift permit.
$125,000
thumbnail SP15-003  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1982    Length: 38    Hull: Fiberglass    Builder: Mel Martin    Location: Alaska
38'x13' Mel Martin sternpicker, flush deck w/ RSW, built in 1982. Volvo 71D rated at 380 hp, Twin Disc 507 gear. Packs about 16,000# with hydraulically driven IMS 7.5 ton RSW system. Large sliding Kinematics drum w/ levelwind. Electronics include radar, GPS, plotter, VHF, and sounder. Price reduced to $125,000.
$90,000
thumbnail SP14-006  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1979    Length: 34    Hull: Aluminum    Builder: Carlson Enterprises    Location: Alaska
34'x12'x2.5' aluminum sternpicker built in 1979 by Carlson Enterprises. Twin Volvo Penta gas mains rated at 300 hp each. Volvo Penta SX DP outdrives. 25 knot cruise. 300 gallons fuel capacity. 12,000# fish hold capacity in (4) separate fish holds. Aluminum reel with KEM drive. Nets included. Electronics include GPS, VHF, Furuno 24 mile radar, and Sitex fathometer. Hynautic controls and Harris steering. Price reduced to $90,000. Cook Inlet drift permit available.
$35,000
thumbnail SP12-018  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1980    Length: 32    Hull: Fiberglass    Builder: Rawson    Location: Alaska
32’x11’x3’ fiberglass gillnetter built by Rawson in 1980. Cat 3208 and Twin Disk gear with just one season of use. Packs 10k pounds. Reel, stern roller, and anchor winch. Electronics include VHF, radar, and sounder. Asking $35,000.
Web Design, 3 Crown Creative