Recently Updated or Added Listings[19 listings]

Click here to be notified of updates to the Recently Updated or Added Listings pagewatch helphelp

Vessels 1 - 19 of 19
$45,000
thumbnail BP17-011  Bowpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page... [ Updated: 2017-12-11 ]
Year: 1981    Length: 27    Hull: Fiberglass    Builder: Uniflite    Location: Washington
27'x9.7' fiberglass bowpicker, built in 1981 by Uniflite. 350 ho gas engine w/ Volvo outdrive. Fiberglass drum with KEM drive. Triple axle galvanized EZ Loader trailer. Dickinson "Bristol" diesel stove. Garmin GPS, Lowrance VHF. New spare prop. Comes with Grays Harbor / Youngs Bay Columbia River permit and 5 nets including a Puget Sound net. Asking $45,000.
$20,000
thumbnail BB17-070  Bristol Bay You must be logged in to watch items for updates. You can click here to go to the Login / Registration page... [ Updated: 2017-12-11 ]
Year: 1980    Length: 32    Hull: Fiberglass    Builder: Modutech    Location: Alaska
32'x14' fiberglass Bristol Bay boat. Built in 1980 by Modutech. Twin Chevy 454 gas engines. GPS, depth sounder, VHF. New batteries in 2017. Comes with 6 nets. Asking $20,000.
$40,000
thumbnail BB17-068  Bristol Bay You must be logged in to watch items for updates. You can click here to go to the Login / Registration page... [ Updated: 2017-12-08 ]
Year: 1980    Length: 32    Hull: Fiberglass    Builder: Nordic    Location: Alaska
32'x12' Bristol Bay gillnetter, built in 1980 by Nordic. GMC 671. Sound power roller, aluminum drum with levelwind, Twister drive. Anchor winch. Electronics include VHF, GPS, and sounder. LED lighting in mast. Includes 5 shackles of gear. Asking $40,000.
$172,000
thumbnail LL17-023  Longliner You must be logged in to watch items for updates. You can click here to go to the Login / Registration page... [ Updated: 2017-12-08 ]
Year: 1983    Length: 40    Hull: Fiberglass    Builder: Snowball    Location: Alaska
40'x10' fiberglass sternpicker built by Snowball in 1983. John Deere 6086 TFM75 rated at 201 hp w/ Twin Disc 5065, both new in 2008. (6) insulated fish holds pack 20k lbs combined. Maritime Fab aluminum drum w/ KEM drive, levelwind and power stern roller. (2) aluminum fuel tanks hold approx 500 gallons. Aluminum aft deck canopy. Hough 19" longline hauler and side roller. Electronics include (2) VHF, radar, GPS, ComNav autopilot and inverter. Focsle heater, hot water heater and marine head. Call for a complete list of gear. SE Drift permit available. Asking $172,000.
$172,000
thumbnail SP17-022  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page... [ Updated: 2017-12-08 ]
Year: 1983    Length: 40    Hull: Fiberglass    Builder: Snowball    Location: Alaska
40'x10' fiberglass sternpicker built by Snowball in 1983. John Deere 6086 TFM75 rated at 201 hp w/ Twin Disc 5065, both new in 2008. (6) insulated fish holds pack 20k lbs combined. Maritime Fab aluminum drum w/ KEM drive, levelwind and power stern roller. (2) aluminum fuel tanks hold approx 500 gallons. Aluminum aft deck canopy. Hough 19" longline hauler and side roller. Electronics include (2) VHF, radar, GPS, ComNav autopilot and inverter. Focsle heater, hot water heater and marine head. Call for a complete list of gear. SE Drift permit available. Asking $172,000.
$800,000
thumbnail CO17-023  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page... [ Updated: 2017-12-07 ]
Year: 1978    Length: 70    Hull: Steel    Builder: Nichols Bros    Location: Alaska
70'x21'x9.5' steel dragger, currently used for research work. Built in 1978 by Nichols Bros. 425 hp Cat 353 main w/ appr. 14K hrs on overhaul. Burns 9 gph @ 8 kts. Twin Disc 4.5:1 gear. Yanmar 36 kW and Kubota 28 kW gen sets. Marco hauler and coiler, Yaquina YB5 trawl winches, net reel and gantry. 4 staterooms w/ 9 berths. Full electronics. Set up for research with laboratory, counter work space and computer space. 3 separate fish holds pack total of 35,000#. Call for recent survey. Asking $800,000.
$800,000
thumbnail DR17-005  Draggers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page... [ Updated: 2017-12-07 ]
Year: 1978    Length: 70    Hull: Steel    Builder: Nichols Bros    Location: Alaska
70'x21'x9.5' steel dragger, currently used for research work. Built in 1978 by Nichols Bros. 425 hp Cat 353 main w/ appr. 14K hrs on overhaul. Burns 9 gph @ 8 kts. Twin Disc 4.5:1 gear. Yanmar 36 kW and Kubota 28 kW gen sets. Marco hauler and coiler, Yaquina YB5 trawl winches, net reel and gantry. 4 staterooms w/ 9 berths. Full electronics. Set up for research with laboratory, counter work space and computer space. 3 separate fish holds pack total of 35,000#. Call for recent survey. Asking $800,000.
$800,000
thumbnail RS17-005  Research You must be logged in to watch items for updates. You can click here to go to the Login / Registration page... [ Updated: 2017-12-07 ]
Year: 1978    Length: 70    Hull: Steel    Builder: Nichols Bros    Location: Alaska
70'x21'x9.5' steel dragger, currently used for research work. Built in 1978 by Nichols Bros. 425 hp Cat 353 main w/ appr. 14K hrs on overhaul. Burns 9 gph @ 8 kts. Twin Disc 4.5:1 gear. Yanmar 36 kW and Kubota 28 kW gen sets. Marco hauler and coiler, Yaquina YB5 trawl winches, net reel and gantry. 4 staterooms w/ 9 berths. Full electronics. Set up for research with laboratory, counter work space and computer space. 3 separate fish holds pack total of 35,000#. Call for recent survey. Asking $800,000.
$50,000
thumbnail BB17-059  Bristol Bay You must be logged in to watch items for updates. You can click here to go to the Login / Registration page... [ Updated: 2017-12-11 ]
Year: 1984    Length: 32    Hull: Aluminum    Builder: American Commercial    Location: Alaska
32'x15' aluminum Bristol Bay boat, built in 1984 by American Commercial. Aluminum hull and fiberglass house. Vessel engine room was flooded and is need of work. Twin 3208 Cats w/ Newage gears, all drained and filled with diesel. New shafts, props and dripless stuffing boxes installed spring of 2017. 7.5 ton Thermal Tec RSW system. Electronics include Furuno GPS, radar, plotter, ComNav autopilot, and more. Located in Naknek. Asking $50,000.
$325,000
thumbnail TR17-041  Trollers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page... [ Updated: 2017-12-08 ]
Year: 1985    Length: 92    Hull: Steel    Builder: Green Boat Yard, MS    Location: Oregon
92'x24'x11' steel tuna troller, build in 1985 by Green Boat Yard. CAT 3406 main rated at 440 hp, installed fall 2017 w/ zero hours on rebuild. Twin Disc MG 514. 50 kW Cummins and 50 kW John Deere gen sets. Packs approximately 110,000 lbs. Blast freeze system w/ 18 ton and 14 ton compressors. Rigged for bait w/ aluminum bait tanks and bait rack. Electronics include (2) GPS, (2) VHF, sat-phone, (2) radar, sounder, Raymarine ST-70 auto pilot, and (2) computers with Rosepoint Coastal Explorer navigation. Call for survey and list of recent upgrades. Asking $325,000.
$325,000
thumbnail TN17-010  Tuna You must be logged in to watch items for updates. You can click here to go to the Login / Registration page... [ Updated: 2017-12-08 ]
Year: 1985    Length: 92    Hull: Steel    Builder: Green Boat Yard, MS    Location: Oregon
92'x24'x11' steel tuna troller, build in 1985 by Green Boat Yard. CAT 3406 main rated at 440 hp, installed fall 2017 w/ zero hours on rebuild. Twin Disc MG 514. 50 kW Cummins and 50 kW John Deere gen sets. Packs approximately 110,000 lbs. Blast freeze system w/ 18 ton and 14 ton compressors. Rigged for bait w/ aluminum bait tanks and bait rack. Electronics include (2) GPS, (2) VHF, sat-phone, (2) radar, sounder, Raymarine ST-70 auto pilot, and (2) computers with Rosepoint Coastal Explorer navigation. Call for survey and list of recent upgrades. Asking $325,000.
$100,000
thumbnail SP17-003  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page... [ Updated: 2017-12-06 ]
Year: 1984    Length: 32    Hull: Aluminum    Builder: Baycraft    Location: Alaska
32'x12.5' aluminum flush deck Bristol Bay gillnetter, built by Baycraft in 1984. Cummins 6BTA 5.9L w/ low hours. Twin Disc 506 gear. New exhaust in 2017. Plenty of room in laz for RSW. Packs approx. 10,000 lbs in (5) recently insulated holds. Maritime Fabrication 48” roller. Aluminum reel w/ Kinematics Twister drive. Electronics include (2) GPS, VHF, SSB, and sounder. Permit available at market price. Reduced to $100,000.
$100,000
thumbnail BB17-007  Bristol Bay You must be logged in to watch items for updates. You can click here to go to the Login / Registration page... [ Updated: 2017-12-06 ]
Year: 1984    Length: 32    Hull: Aluminum    Builder: Baycraft    Location: Alaska
32'x12.5' aluminum flush deck Bristol Bay gillnetter, built by Baycraft in 1984. Cummins 6BTA 5.9L w/ low hours. Twin Disc 506 gear. New exhaust in 2017. Plenty of room in laz for RSW. Packs approx. 10,000 lbs in (5) recently insulated holds. Maritime Fabrication 48” roller. Aluminum reel w/ Kinematics Twister drive. Electronics include (2) GPS, VHF, SSB, and sounder. Permit available at market price. Reduced to $100,000.
$75,000
thumbnail TR16-042  Trollers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page... [ Updated: 2017-12-11 ]
Year: 1948    Length: 40    Hull: Wood    Builder: Ole Wick    Location: Washington
40'x11' wood troller, built in Canada in 1948 by Wick. 75 hp Gardner diesel, burns only 1.5 gph at 7.5-8 kt cruise. Capital gear. Regular updates have included new bow stem in 2001, new decks and stern rebuilt since 2013. Electronics include Furuno GPS, radar, sounder, Wagner pilot, and more. Boat has been used as recreational vessel but can troll. Plumbed hydraulics but no gurdies. Packs 7,000#. Asking $75,000.
$2,700,000
thumbnail PR16-002  Processors You must be logged in to watch items for updates. You can click here to go to the Login / Registration page... [ Updated: 2017-12-11 ]
Year: 1978    Length: 160    Hull: Steel    Builder: Bender    Location: Washington
160'x35'x14.25' steel ex-crab catcher/processor, built in 1978 by Bender. Twin Lugger 6170 mains rated at 700 hp ea. (2) 300 kw GMC 8V92 gensets and (1) 650 kw Cummins KTA38GI gen set. 60' x 30' clear deck area. Quarters for 32 people. 81,500 gallons fuel, 24,500 water. Vessel has been used for research, crab, and longline. Recent 5 year ABS loadline renewal. Call for survey or additional info. Asking $2,700,000.
$2,700,000
thumbnail RS16-002  Research You must be logged in to watch items for updates. You can click here to go to the Login / Registration page... [ Updated: 2017-12-11 ]
Year: 1978    Length: 160    Hull: Steel    Builder: Bender    Location: Washington
160'x35'x14.25' steel ex-crab catcher/processor, built in 1978 by Bender. Twin Lugger 6170 mains rated at 700 hp ea. (2) 300 kw GMC 8V92 gensets and (1) 650 kw Cummins KTA38GI gen set. 60' x 30' clear deck area. Quarters for 32 people. 81,500 gallons fuel, 24,500 water. Vessel has been used for research, crab, and longline. Recent 5 year ABS loadline renewal. Call for survey or additional info. Asking $2,700,000.
$2,700,000
thumbnail LL16-011  Longliner You must be logged in to watch items for updates. You can click here to go to the Login / Registration page... [ Updated: 2017-12-11 ]
Year: 1978    Length: 160    Hull: Steel    Builder: Bender    Location: Washington
160'x35'x14.25' steel ex-crab catcher/processor, built in 1978 by Bender. Twin Lugger 6170 mains rated at 700 hp ea. (2) 300 kw GMC 8V92 gensets and (1) 650 kw Cummins KTA38GI gen set. 60' x 30' clear deck area. Quarters for 32 people. 81,500 gallons fuel, 24,500 water. Vessel has been used for research, crab, and longline. Recent 5 year ABS loadline renewal. Call for survey or additional info. Asking $2,700,000.
$2,700,000
thumbnail CR16-011  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page... [ Updated: 2017-12-11 ]
Year: 1978    Length: 160    Hull: Steel    Builder: Bender    Location: Washington
160'x35'x14.25' steel ex-crab catcher/processor, built in 1978 by Bender. Twin Lugger 6170 mains rated at 700 hp ea. (2) 300 kw GMC 8V92 gensets and (1) 650 kw Cummins KTA38GI gen set. 60' x 30' clear deck area. Quarters for 32 people. 81,500 gallons fuel, 24,500 water. Vessel has been used for research, crab, and longline. Recent 5 year ABS loadline renewal. Call for survey or additional info. Asking $2,700,000.
$2,700,000
thumbnail CO16-011  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page... [ Updated: 2017-12-11 ]
Year: 1978    Length: 160    Hull: Steel    Builder: Bender    Location: Washington
160'x35'x14.25' steel ex-crab catcher/processor, built in 1978 by Bender. Twin Lugger 6170 mains rated at 700 hp ea. (2) 300 kw GMC 8V92 gensets and (1) 650 kw Cummins KTA38GI gen set. 60' x 30' clear deck area. Quarters for 32 people. 81,500 gallons fuel, 24,500 water. Vessel has been used for research, crab, and longline. Recent 5 year ABS loadline renewal. Call for survey or additional info. Asking $2,700,000.
Web Design, 3 Crown Creative